HPE Community
Switches, Hubs, and Modems
1754016 Members
7485 Online
108811 Solutions
New Discussion

managing GbE2/GbE2c in PCM 2.3?

 
AccuMegalith
Advisor

‎09-16-2008 05:36 AM

‎09-16-2008 05:36 AM

managing GbE2/GbE2c in PCM 2.3?

I recently downloaded and installed PCM 2.3, but so far it's only detecting my 2600/2800 switches. I have a total of eight GbE2 and GbE2c switches, and need to see them in the same network maps as the rackmount switches. Everything has the same SNMP community strings, but PCM is only detecting one of the eight blade switches, and places the rest as unknown nodes. The one that it does recognize as a switch shows no links or other relationship to the rackmount switches, despite being directly connected. Manual discovery connects to the switches, but fails on the discovery step.

Is it possible to view/manage blade switches in PCM?
White water rafting on a river of acid
0 Kudos
1 REPLY 1
Ross Yendle
New Member

‎09-26-2008 03:51 AM

‎09-26-2008 03:51 AM

Re: managing GbE2/GbE2c in PCM 2.3?

Blade switches aren't actually Procurve products, they Proliant products. This means that the Procurve Management software won't recognize and be able to manage them correctly.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.