Switches, Hubs, and Modems
1748009 Members
4557 Online
108757 Solutions
New Discussion юеВ

mstp maintenance

 
languedoc
Occasional Advisor

mstp maintenance

Are there specifics commands for mstp administration?

I have 3 switch connected together(two distribution switches and an acces switch. I configured MSTP everything was ok. I replaced the acces switch (hp 2626) by a catalyst 3550, because I have a mixed environment. The MSTP configuration remains the same, but there is no communication among computers connected port of the same vlan even in the same switch. I removed the catalyst 3550 and there is no communication eather.

This is a test enviroment. Soon I will put it into production, but this is holding me in the test step.



Thanks
2 REPLIES 2
DaGuru
Trusted Contributor

Re: mstp maintenance

Can you please provide the switch configurations along with a show span active output from each switch? Also a link map might be helpfull to understand where your redundant connections are.
---------------------------------------------
I work for HP, but my posts and replies are my own.
languedoc
Occasional Advisor

Re: mstp maintenance

Ok
I wil provide you that a.s.a.p
thanks