HPE Community
Switches, Hubs, and Modems
1752726 Members
5523 Online
108789 Solutions
New Discussion юеВ

poor network performance

 
sunil kattikar
Occasional Advisor

тАО07-15-2003 06:29 AM

тАО07-15-2003 06:29 AM

poor network performance

I connected sun 3500 to switch.server is configured for full duplex.but on switch,in the o/p of SHOW PORT STATUS command it is showing a-half a-100 10/100/1000. is it correct. my problem is i unable to load oracle
on sun server which is nfs mounted from nas 8000 storage.pls suggest possible reasons & solutions.
0 Kudos
2 REPLIES 2
Jerome Henry
Honored Contributor

тАО07-15-2003 06:31 AM

тАО07-15-2003 06:31 AM

Re: poor network performance

Try first to set switch to full or, better, auto... Let us know if it solves, and if it doesn't tell us about error message.

hope this helps.

J
You can lean only on what resists you...
0 Kudos
Tim Durack
New Member

тАО07-15-2003 05:47 PM

тАО07-15-2003 05:47 PM

Re: poor network performance

If the server is truly configured for 100/Full, the switch port must be configured 100/Full to match.

Do not set the switch port Auto unless the server is configured Auto, otherwise you will experience a duplex miss-match (which is what you describe)
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.