port mirroring

[wong seng guan]

I had few switch HP ProCurve Switch 2524 series. It's possible to configure port mirroring? and if yes, how to configure it.

Thanks

jason

[Les Ligetfalvy]

While you can do it from the CL at the console, the easy way is through the web interface. Just go to "Monitor port" under "Configuration" and follow your nose.

[Mohammed Safadi · Accepted solution]

Hi Jason

Yes!!!!
You can designate a port for monitoring traffic of one or more other ports or
of a single VLAN configured on the HP ProCurve 2500 Series Switches.

Port Mirroring can be configured using CLI as following steps

1. Assign port as the monitoring port:
Example: HP2524(config)# mirror-port 24

2. Select ports or VLAN for to turn monitoring ON:
Example: HP2524(config)# int e 1-3 monitor
or
HP2524(config)# vlan 4 monitor

Hope this could help

Regards

[wong seng guan]

Thanks every body

[RajeevD]

Is it possible to get mirror source packet captured on 2 destination ports for J9148A, HP 2910-48G-PoE+ al Switch? Can we create groups at the destination for getting the packets at 2 different packet analyzers?