Online Expert Day - HPE Data Storage - Live Now
April 24/25 - Online Expert Day - HPE Data Storage - Live Now
Read more
Switches, Hubs, and Modems
Showing results for 
Search instead for 
Did you mean: 

port mirroring

Go to solution
wong seng guan
Frequent Advisor

port mirroring

I had few switch HP ProCurve Switch 2524 series. It's possible to configure port mirroring? and if yes, how to configure it.



Les Ligetfalvy
Esteemed Contributor

Re: port mirroring

While you can do it from the CL at the console, the easy way is through the web interface. Just go to "Monitor port" under "Configuration" and follow your nose.

Re: port mirroring

Hi Jason

You can designate a port for monitoring traffic of one or more other ports or
of a single VLAN configured on the HP ProCurve 2500 Series Switches.

Port Mirroring can be configured using CLI as following steps

1. Assign port as the monitoring port:
Example: HP2524(config)# mirror-port 24

2. Select ports or VLAN for to turn monitoring ON:
Example: HP2524(config)# int e 1-3 monitor
HP2524(config)# vlan 4 monitor

Hope this could help


wong seng guan
Frequent Advisor

Re: port mirroring

Thanks every body
Occasional Visitor

Re: port mirroring

Is it possible to get mirror source packet captured on 2 destination ports for J9148A, HP 2910-48G-PoE+ al Switch? Can we create groups at the destination for getting the packets at 2 different packet analyzers?