port

[ammadeyy]

hp 2626 switch

VLAN 1 SERVERS
port 1 ISA
port 2 SQL

VLAN 2 POS
port 3

i want
port 2 and port 3 can talk each other
port 3 cannot talk to port 1

how can i do that

[Jonathan Axford]

Hi,

Are the two VLAN's in seperate IP Subnets?

If they are, you will need to set up routing between the two, Otherwise they will not be aware of each other,

If you like, show us the config of the switch and we should be able to sort it out,

Cheers

[ammadeyy]

VLAN 1 SERVERS 10.17.2.1
port 1 ISA
port 2 SQL

VLAN 2 POS
port 3 untagged
10.17.4.1 POS
10.17.5.1 ADMIN

i have enabled local routing

when i run show ip route it gives out loop back ip address

if i add routing to this table will it work? or do i need another router for routin?

im using 2626 switch

[Hugo Tigre · Accepted solution]

I was under the impression that switch didn't had routing capabiliites, but i've been checking and actualy it does have basic routing.

i've never worked with that router but, if you enable ip routing all vlans should be able to comunicate with one another.

U can also had up to 16 static routes.

if u still are having problems, try typing "show running-config" and them copy that text to a txt file, them post your txt here, that way it will be easier for us to see what's wrong.

regards,
Hugo.