Switches, Hubs, and Modems
1748136 Members
3687 Online
108758 Solutions
New Discussion

primary-vlan bug in ProCurve 2910al software W.14.38

 
provicor
New Member

primary-vlan bug in ProCurve 2910al software W.14.38

2910al with W.14.38 does not accept CLI command:
"primary-vlan [VLAN_ID]", where VLAN_ID is higher than 3.
The switch fails with error: "[VLAN_ID]: Error accessing configuration."

Software W.14.30 works as expected and can set primary VLAN to any supported VLAN ID.

Workaround:
Boot 2910al with older sw W.14.30 from other flash image, set the primary-vlan, boot with sw W.14.38 using same configuration file. The W.14.38 loads the correct configuration set by W.14.30, but you cant use the the primary-vlan command or it fails again.
1 REPLY 1
provicor
New Member

Re: primary-vlan bug in ProCurve 2910al software W.14.38

HP ProCurve customer support provided us software version W.14.49. It fixes the primary-vlan problem.

Actually release notes say that W.14.45 includes the fix, but W.14.49 was latest available.

Problem solved.