Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

pro curve 5308xl

Randy Grammar
Occasional Visitor

pro curve 5308xl

when i am trying to set secondary ip to the default vlan i enter the command:

server room 5308(vlan-1)# ip address 172.18.204.2/24 secondary
this is how the manual on page 7-10 inducates how to only to get error

invalad input: secondary

?????
help
2 REPLIES
Ardon
Trusted Contributor

Re: pro curve 5308xl

Hi,

Then that is a mistake in the manual. On the 53XX you simply issue another IP ADDRESS /Subnet Mask.

I will report this mistake to the Tech Writers.

Regards, Ardon
ProCurve Networking Engineer
Gonzo Granello
Valued Contributor

Re: pro curve 5308xl

you must have had an old copy ofthe manual, that procedure has been changed after the 1st software rev. and should be correct in the manual unless a cut and paste error happend.


///Andreas


PS: I found that issue first and had it fixed in the manual.
most time the day i have to mask my contempt for the a-holes in charge......