Switches, Hubs, and Modems
1748254 Members
4085 Online
108760 Solutions
New Discussion юеВ

Re: problem with TACACS+ and ProCurve Switch

 
Denis Yablokov
Occasional Contributor

problem with TACACS+ and ProCurve Switch

Hello,
I have CISCO ACS and many hp switch, and want centralized authentication, but some problem is appear.
Example config on Hp5308 :
aaa authentication login privilege-mode
aaa authentication ssh login tacacs local
aaa authentication ssh enable tacacs local

On the tacacs server :
1)Create user
2)Set Enable Options for user (Max Privilege for any AAA Client = level 15)

When I did a SSH, i authenticated and logged on as OPERATOR, but must as MANAGER.

What i do wrong?


2 REPLIES 2
Igoris_1
Frequent Advisor

Re: problem with TACACS+ and ProCurve Switch

did you send manager user name?
Also try "enable' command to switch from operator to manager level.
Denis Yablokov
Occasional Contributor

Re: problem with TACACS+ and ProCurve Switch

1)did you send manager user name?
yes

2)Also try "enable' command to switch from operator to manager level.

It is not conveniently!