Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

problem with TACACS+ and ProCurve Switch

Denis Yablokov
Occasional Contributor

problem with TACACS+ and ProCurve Switch

Hello,
I have CISCO ACS and many hp switch, and want centralized authentication, but some problem is appear.
Example config on Hp5308 :
aaa authentication login privilege-mode
aaa authentication ssh login tacacs local
aaa authentication ssh enable tacacs local

On the tacacs server :
1)Create user
2)Set Enable Options for user (Max Privilege for any AAA Client = level 15)

When I did a SSH, i authenticated and logged on as OPERATOR, but must as MANAGER.

What i do wrong?


2 REPLIES
Igoris_1
Frequent Advisor

Re: problem with TACACS+ and ProCurve Switch

did you send manager user name?
Also try "enable' command to switch from operator to manager level.
Denis Yablokov
Occasional Contributor

Re: problem with TACACS+ and ProCurve Switch

1)did you send manager user name?
yes

2)Also try "enable' command to switch from operator to manager level.

It is not conveniently!