Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

"Excessive Late Collisions" need help :(

vaillancourtmichel
Occasional Advisor

"Excessive Late Collisions" need help :(

hi,
"Excessive Late Collisions"
I have Encountered this problem meny times can Does anyone know the problem and can help me?
3 REPLIES
ANNIE
Trusted Contributor

Re: "Excessive Late Collisions" need help :(

Hi,

Can you specify your product, issues in details?
Thanks
----------------------------------------------------------------------------------------------------------------------------------
** If found useful, please assign kudos located at the left hand side.
Thanks.

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Re: "Excessive Late Collisions" need help :(

Late Collisions in Twisted Pair Network are an indicator for wrong Portmode in most cases.

Seem you have set one Port (i.e. the Maschine) to autoneg and the other Port (switch) to a fixed speed and duplex.

Both sites have to be configured to same mode. Autoneg or fixed.
vaillancourtmichel
Occasional Advisor

Re: "Excessive Late Collisions" need help :(

my switch model is "hp j4865a 4108gl".I found that what is making the error is a printer.

the last message taht i received is

Description:
Port failure. A reset has occurred on port C21.

Solution:
The switch has re-initialized the port due to an inability to read from the port.

how can you help me??