Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

reg:other question on hp-2824

reg:other question on hp-2824

Dear sir,

We have hp-2824 switch we r planing to do on hp-2824 we r planing to create 4 vlans with different subnets to maintain different branches using hp-2824 and hp-800 unmanagble switches .we r looking for from hp-2824 to maintain remote locations .Is this setup is possible .If possible plz give me config examples.
If that helps to me iam very greatfull to u.

Thanks&Regards
srini
3 REPLIES
cenk sasmaztin
Honored Contributor

Re: reg:other question on hp-2824

hi Srini
yes setup is possible

you can create four vlan 2824 switch and connect vlan's untag port hp-800 switch

example config for you
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1,8-26****connect hp-800 int 1,8-26 for vlan 1)
ip address 10.0.10.1 255.255.255.0
no untagged 2-7
exit
vlan 2
name "VLAN2"
untagged 2-3******(connect hp-800 int 2 or 3 for vlan 2)
ip address 10.0.12.1 255.255.255.0
exit
vlan 3
name "VLAN3"
untagged 4-5******(connect hp-800 int 4 or 5 for vlan 3)
ip address 10.0.13.1 255.255.255.0
exit
vlan 4
name "VLAN4"
untagged 6-7******(connect hp-800 int 6 or 7 for vlan 4)
ip address 10.0.14.1 255.255.255.0
exit

cenk
cenk

Re: reg:other question on hp-2824

Dear sir,

thanks for ur reply and one more small clarification i want a vlan-1 ia able to communicate all vlans and reming vlans dont want to communicate .plz help in this.

Thanks&Regards
srini
cenk sasmaztin
Honored Contributor

Re: reg:other question on hp-2824

ProCurve Switch 2626# sh run

Running configuration:

; J4900B Configuration Editor; Created on release #H.10.50

hostname "ProCurve Switch 2626"
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1,8-26
ip address 10.0.10.1 255.255.255.0
no untagged 2-7
exit
vlan 2
name "VLAN2"
untagged 2-3
ip address 10.0.12.1 255.255.255.0
exit
vlan 3
name "VLAN3"
untagged 4-5
ip address 10.0.13.1 255.255.255.0
exit
vlan 4
name "VLAN4"
untagged 6-7
ip address 10.0.14.1 255.255.255.0
exit

ProCurve Switch 2626# conf
ProCurve Switch 2626(config)# filter p
Invalid input: p
ProCurve Switch 2626(config)# filter
source-port Specify source-port filter to manage.
ProCurve Switch 2626(config)# filter source-port 2
drop Set a list of ports to which forwarding of filtered
packets is not permitted.
forward Set a list of ports to which forwarding of filtered
packets is permitted.
named-filter Set the filter name.

ProCurve Switch 2626(config)# filter source-port 2 drop 4,5,6,7
ProCurve Switch 2626(config)# filter source-port 3 drop 4,5,6,7
ProCurve Switch 2626(config)# filter source-port 4 drop 2,3,6,7
ProCurve Switch 2626(config)# filter source-port 5 drop 2,3,6,7
ProCurve Switch 2626(config)# filter source-port 6 drop 2,3,4,5
ProCurve Switch 2626(config)# filter source-port 7 drop 2,3,4,5
ProCurve Switch 2626(config)# wr mem
ProCurve Switch 2626(config)# sh run

Running configuration:

; J4900B Configuration Editor; Created on release #H.10.50

hostname "ProCurve Switch 2626"
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1,8-26
ip address 10.0.10.1 255.255.255.0
no untagged 2-7
exit
vlan 2
name "VLAN2"
untagged 2-3
ip address 10.0.12.1 255.255.255.0
exit
vlan 3
name "VLAN3"
untagged 4-5
ip address 10.0.13.1 255.255.255.0
exit
vlan 4
name "VLAN4"
untagged 6-7
ip address 10.0.14.1 255.255.255.0
exit
filter source-port "2" drop 4-7
filter source-port "3" drop 4-7
filter source-port "4" drop 2-3,6-7
filter source-port "5" drop 2-3,6-7
filter source-port "6" drop 2-5
filter source-port "7" drop 2-5

ProCurve Switch 2626(config)#
cenk