Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

removing spanning tree priority in a 2626

red5.1992
Occasional Advisor

removing spanning tree priority in a 2626

Hi all

i'd like to remove the Spanning tree priority on a procurve 2626.

but i cannot find the command on the CLI.


here's what i have when i do a sh run
spanning-tree priority 15

the "no" before the command goes wrong, i can change the number, but i'd like to restore the default settings on this item.



thanks very much for your help.


Red2
4 REPLIES
marsh_1
Honored Contributor

Re: removing spanning tree priority in a 2626

hi,

this an openvms forum, you need the networking forum !

Richard Brodie_1
Honored Contributor

Re: removing spanning tree priority in a 2626

Set it back to the default, 8.
red5.1992
Occasional Advisor

Re: removing spanning tree priority in a 2626

thanks very much !

red5.1992
Occasional Advisor

Re: removing spanning tree priority in a 2626

Richard Brodie gave me the solution