Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

routing according to vlans(or interface) on 5400yl

Mahmut_1
Occasional Contributor

routing according to vlans(or interface) on 5400yl

hi,
i want to make some vlans have different gateway on the 5400yl.
i can only enter one route
ip route 0.0.0.0 0.0.0.0 192.168.x.x(192.168.x.x is one of firewall interface).
grrp enabled on this switch and every client has a virtual gateway.
i mean
i want to route clients according to vlans on the switch like fortigate policy route.ex;
vlan name network gateway
vlan2 0.0.0.0 0.0.0.0 10.105.1.2
vlan3 0.0.0.0 0.0.0.0 10.105.5.5
1 REPLY
Mohieddin Kharnoub
Honored Contributor

Re: routing according to vlans(or interface) on 5400yl

Hi

Multiple gateways based on the source address is not available on any of the ProCurve switches except the 9300 Core switch.

You can achieve that with Policy Based Routing that can be done on a ProCurve Router.

Good Luck !!!
Science for Everyone