Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

session timeout remote management

jele
Occasional Contributor

session timeout remote management

hello,

we want to configure session timout (after 5 minutes of inactivity) for telnet or ssh session on procurve 2524. How can I configure it?

regards
jele
2 REPLIES
Matt Hobbs
Honored Contributor

Re: session timeout remote management

I believe it is:

HP ProCurve Switch(config)# console inactivity-timer 5

Command will take effect after saving configuration and reboot.

Mohieddin Kharnoub
Honored Contributor

Re: session timeout remote management

Hi

Use the command:

(Config)# Console inactivity-timer 5

Explain:
Console inactivity-timer <0 | 1 | 5 | 10 | 15 | 20 | 30 | 60 | 120> - Sets the number of minutes of inactivity allowed by the switch before the switch will terminate the communication session. 0 means never terminate the session; default is 0.

Don;t forget to assign points ,

Good Luck !!!
Science for Everyone