Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

slow path with RP and WESM

giovanni_NA
Occasional Visitor

slow path with RP and WESM

Hi,I'm going to switch my enterprise wireless network to Wireless Edge Service Module plus RP210.
The coverege seems to be good but the ping response time, the reliability and the troughput seem to be worst.
My topology is:
2 HP9300 L3 routing Switch
approximately 100 switch 2600 normal and powered
approximately 50 access point that will be substituted by RP210.
I've tried in another enterprise with differtent layer 3 switch and had no problem.
some one can help me?
2 REPLIES
Matt Hobbs
Honored Contributor

Re: slow path with RP and WESM

Make sure you're running the latest WESM software, I know there was a performance issue previously with file transfer speeds.
giovanni_NA
Occasional Visitor

Re: slow path with RP and WESM

I've resolved this problem disabling the power safe management of the wireless card.