HPE Community
Switches, Hubs, and Modems
1752790 Members
5734 Online
108789 Solutions
New Discussion

sorting through the running config

 
gunnarwb
Occasional Contributor

‎09-28-2009 06:57 AM

‎09-28-2009 06:57 AM

sorting through the running config

Is there anyway on a HP switch to do a:

show run | include "whatever"

or

show run | begin "wherever"

these are very simple commands that I have used for years in the Cisco realm but I haven't been able to find anything on the HP side. I just want to filter down what I'm seeing in my show run. I have a core with a bunch of blades and my config is pages long.
0 Kudos
1 REPLY 1
Tijl van der Steeg
Valued Contributor

‎09-29-2009 03:48 AM

‎09-29-2009 03:48 AM

Re: sorting through the running config

I'm quite sure this is not possible, would be a nice feature request. Same for the other show * features
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.