Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

sorting through the running config

gunnarwb
Occasional Contributor

sorting through the running config

Is there anyway on a HP switch to do a:

show run | include "whatever"

or

show run | begin "wherever"

these are very simple commands that I have used for years in the Cisco realm but I haven't been able to find anything on the HP side. I just want to filter down what I'm seeing in my show run. I have a core with a bunch of blades and my config is pages long.
1 REPLY
Tijl van der Steeg
Valued Contributor

Re: sorting through the running config

I'm quite sure this is not possible, would be a nice feature request. Same for the other show * features