Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

t5500 Imaging with Cisco switches and portfast enabled

David_746
Advisor

t5500 Imaging with Cisco switches and portfast enabled

We have a number of HP5500 thin clients that we are trying to image. We have created an image from a test terminal but the problem is deploying the image. All the units are plugged into Cisco switches, we have enabled portfast on the switch ports that the terminals are plugged into and also on the port that the dhcp server is on.
PCs and laptops can pickup dhcp addresses from the RDP server fine when plugged into the same port with the same cable etc. Also the terminals seem to pickup an address if we put a hub inbetween the Cisco switch and the terminal, this obviously is not a workable solution.
If anyone can shed any light that would much appreciated.