HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

traffic between 2 subnets

 
ammadeyy
Contributor

traffic between 2 subnets

procurve 2626

i have created VLAN name POS with 2 subnets
10.17.4.1
10.17.5.1

i dont wont both subnets to see each other
how can i do this?

2 REPLIES
Hugo Tigre
Trusted Contributor

Re: traffic between 2 subnets

if u don't have routing enable, the two networks won't be able to interact.

Re: traffic between 2 subnets

Hey ammadey

you can achieve your requirment by separating the subnets in two different vlans

HP2626(config)# vlan 1 ip address 10.17.4.1 255.255.0.0

HP2626(config)# vlan 2 ip address 10.17.5.1 255.255.0.0

and don't enable IP routing on the switch


Hope this can help

Regards