Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

trunk to different uplink

SOLVED
Go to solution
stefano colombo_1
Super Advisor

trunk to different uplink

we are implementing a scenario with two core switch ( 5406 ) and several edges ( 2910-48)
I Just want a quick check on the configuration we wish to do.

we want to create a 2-port trunk on each 2910 switch and each port will be connected to one 5406

Is that correct ?
Is there some "design" guide from hp I can look for ?

thanks
4 REPLIES
Michael_Breuer
Esteemed Contributor
Solution

Re: trunk to different uplink

Hello Stefano,

a trunk between switches always have to be coterminous - meaning begin together an end together. Use spanning tree protocol to create redundant connections.

Cheers,

Michael
Ingentive Networks GmbH
stefano colombo_1
Super Advisor

Re: trunk to different uplink

Thought it was possible
thanks
stefano colombo_1
Super Advisor

Re: trunk to different uplink

.
Pieter 't Hart
Honored Contributor

Re: trunk to different uplink