Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

trunking configuration

Shio Soon Siang
Occasional Advisor

trunking configuration

Hi All,

just want someone to verify whether network diagram below ok or not. Thanks first

please refer to the attachment. Thanks
10 REPLIES
cenk sasmaztin
Honored Contributor

Re: trunking configuration

hi Shio

your configration very good but I want make few additional command on switch

enable stp on each switch for loop protech

and vlan 1 (default vlan )must be untagged member on trukport all other vlans must be tag member on trunk port

good luck
cenk

Shio Soon Siang
Occasional Advisor

Re: trunking configuration

Hi,

Thanks for reply.......

i already enable stp on both switch.....

how about span priority?

commander switch set as span priority 0 and other set as 4 (which is by default)?

Thanks for help and advice....

Thanks
Alessandro_78
Regular Advisor

Re: trunking configuration

How is possibile to do trunking between multiple switches?

Vif1 and Vif2 NetAppDRC cant' be trunked in a single 'bigger' trunked link that belongs to multiple switches...
cenk sasmaztin
Honored Contributor

Re: trunking configuration

I think you have one vlan (default vlan)on network therefore single spaning tree enable for loop protech between switch
cenk

Alessandro_78
Regular Advisor

Re: trunking configuration

Chenk are you replying to me?
cenk sasmaztin
Honored Contributor

Re: trunking configuration

sorry
cenk

Alessandro_78
Regular Advisor

Re: trunking configuration

Hi cenk.
With your draw, is not possibile to trunk trk1 with trk3, right?

So is not possibile to do what Shio is asking for...
Shio Soon Siang
Occasional Advisor

Re: trunking configuration

Hi All,

Thanks for help. I did exactly the same like Cenk before posted this tread.

And it seem like ok.

anyway, am i overlook something or can it be improve......?

Thanks
Alessandro_78
Regular Advisor

Re: trunking configuration

So you did a trunk between trk1 and trk3?
How?

I think is not possibile to trunk ports connected to different switches.
Alessandro_78
Regular Advisor

Re: trunking configuration

Any update with this?
Is possibile to trunk trk1 and trk3 over different switches?