Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

vlan-based qos on 2626

atjohnsn
Occasional Visitor

vlan-based qos on 2626

I can configure vlan priority for my 2626 switch via the cli. example: vlan 99 qos priority 6. Vlan 3 qos priority 3.

Strangely, the QOS priority is not visible in the gui.

The QOS also shows up when I do a show qos vlan-priority.

Why? Is the GUI broken? Or is QOS not working as I am expecting?
1 REPLY
cenk sasmaztin
Honored Contributor

Re: vlan-based qos on 2626


yess atjohnsn no see in GUI vlan priority after vlan config cli on switch.
Because you always believe CLI.
you make all command and view operation on CLI ;GUI use java ,web browser type etc. component therefore one component problematic you see false information.
CLI include most command and view operation.

cenk



sw(vlan-2)# qos priority
0
1
2
3
4
5
6
7
sw(vlan-2)# qos priority 6

sw(vlan-2)# sh qos vlan-priority

VLAN priorities

VLAN ID Apply rule | DSCP Priority
------- ----------- + ------ -----------
1 No-override | No-override
2 Priority | 6


sw(vlan-2)#







cenk