Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

vlan routing

SOLVED
Go to solution
ksvijay957
Occasional Advisor

vlan routing

Heloo,
can any one advice me how do i configure ospf to restrict access between several VLANs, i have 13 vlan configured and each vlan needs to access nearly 6 vlans and other should block the access.thnx.
1 REPLY
Jeff Carrell
Honored Contributor
Solution

Re: vlan routing

Do this with Access Control Lists (ACL's), not really inside of OSPF, as it is a router protocol, not a traffic cop (mostly).

Get this CLI ref guide, it shows how to configure HP ProVision, HP Comware5 and Cisco switches for lots of different functions, in a side-by-side comparison, so if you know one CLI, you see how to do it in a different CLI:

http://h17007.www1.hp.com/docs/interoperability/Cisco/HP-Networking-and-Cisco-CLI-Reference-Guide_June_10_WW_Eng_ltr.pdf


There is info on how to configure ACL's, but you must provide the "what you want to allow or not allow" info...


hth...Jeff