- Community Home
- >
- Networking
- >
- Legacy
- >
- Switches, Hubs, Modems
- >
- Re: vlan trunk
Categories
Company
Local Language
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Community
Resources
Forums
Blogs
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО06-25-2008 09:09 PM
тАО06-25-2008 09:09 PM
fiber optics conneted(4506 gi3/1 to hp 2650 port 49)
I am trying the right configuration to be able to configure the vlan and trunk?
share vlan17 ,18,19 in two device
This is show run in 2650
hostname "ProCurve Switch 2650"
ip default-gateway 192.168.12.254
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 37-48,50
ip address 192.168.12.253 255.255.255.0
no untagged 1-36
tagged 49
exit
vlan 17
name "vlan17"
untagged 1-12
tagged 49
exit
vlan 18
name "vlan18"
untagged 13-22
tagged 49
exit
vlan 19
name "vlan19"
untagged 23-36
tagged 49
exit
4506 show run
R4506#show run
Building configuration...
Current configuration : 6313 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
service compress-config
!
hostname R4506
!
boot-start-marker
boot-end-marker
!
enable password 7 0822455D0A16
!
no aaa new-model
ip subnet-zero
no ip domain-lookup
ip dhcp pool vlan17
network 192.168.17.0 255.255.255.0
default-router 192.168.17.254
dns-server 61.177.7.1
!
ip dhcp pool vlan19
network 192.168.19.0 255.255.255.0
default-router 192.168.19.254
dns-server 61.177.7.1
!
ip dhcp pool vlan18
network 192.168.18.0 255.255.255.0
default-router 192.168.18.254
dns-server 61.177.7.1
!
ip dhcp-server 192.168.10.100
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
power redundancy-mode redundant
!
!
!
vlan internal allocation policy ascending
!
interface GigabitEthernet1/1
!
interface GigabitEthernet1/2
!
interface GigabitEthernet3/1
switchport trunk encapsulation dot1q
switchport mode trunk
interface Vlan18
ip address 192.168.18.254 255.255.255.0
!
interface Vlan19
ip address 192.168.19.254 255.255.255.0
!
ip route 0.0.0.0 0.0.0.0 192.168.10.1
ip http server
Thanks
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО06-25-2008 11:12 PM
тАО06-25-2008 11:12 PM
Re: vlan trunk
very succesfully config each switch for vlan trunk
what is your problem?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО06-25-2008 11:32 PM
тАО06-25-2008 11:32 PM
Re: vlan trunk
my problem is on cisco 4506
ping 192.168.12.253(HP 2650 manegement) is time out
R4506#show run
Building configuration...
Current configuration : 7038 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
service compress-config
!
hostname R4506
!
boot-start-marker
boot-end-marker
!
enable password 7 0822455D0A16
!
no aaa new-model
ip subnet-zero
no ip domain-lookup
!
ip dhcp pool vlan12
network 192.168.12.0 255.255.255.0
default-router 192.168.12.254
dns-server 61.177.7.1
lease 7
!
!
ip dhcp pool vlan11
network 192.168.11.0 255.255.255.0
default-router 192.168.11.254
dns-server 192.168.10.200
!
ip dhcp pool vlan16
network 192.168.16.0 255.255.255.0
default-router 192.168.16.254
dns-server 61.177.7.1
!
ip dhcp pool vlan17
network 192.168.17.0 255.255.255.0
default-router 192.168.17.254
dns-server 61.177.7.1
!
ip dhcp pool vlan19
network 192.168.19.0 255.255.255.0
default-router 192.168.19.254
dns-server 61.177.7.1
!
ip dhcp pool vlan18
network 192.168.18.0 255.255.255.0
default-router 192.168.18.254
dns-server 61.177.7.1
!
ip dhcp-server 192.168.10.200
!
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
power redundancy-mode redundant
!
!
!
vlan internal allocation policy ascending
!
interface GigabitEthernet1/1
!
interface GigabitEthernet1/2
!
interface GigabitEthernet3/1
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface GigabitEthernet3/2
switchport access vlan 13
switchport mode access
!
interface GigabitEthernet3/3
interface GigabitEthernet3/4
!
interface GigabitEthernet3/5
!
interface GigabitEthernet3/6
!
interface GigabitEthernet5/1
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/2
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/3
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/4
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/5
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/6
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/7
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/8
switchport access vlan 20
switchport mode access
!
interface GigabitEthernet5/9
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/10
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/11
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/12
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/13
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/14
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/15
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/16
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/17
description INTERNET
switchport mode access
speed 100
duplex full
!
interface GigabitEthernet5/18
description INTERNET
switchport access vlan 12
switchport mode access
!
interface GigabitEthernet5/19
description INTERNET
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/20
description INTERNET
switchport access vlan 18
switchport mode access
!
interface GigabitEthernet5/21
!
interface GigabitEthernet5/22
switchport access vlan 10
switchport mode access
!
interface GigabitEthernet5/23
interface GigabitEthernet5/24
switchport access vlan 10
switchport mode access
!
interface Vlan1
ip address 192.168.100.254 255.255.255.0
!
interface Vlan10
ip address 192.168.10.254 255.255.255.0
!
interface Vlan12
ip address 192.168.12.254 255.255.255.0
!
interface Vlan13
ip address 192.168.13.254 255.255.255.0
!
interface Vlan14
ip address 192.168.14.254 255.255.255.0
ip access-group 114 in
!
interface Vlan17
ip address 192.168.17.254 255.255.255.0
!
interface Vlan18
ip address 192.168.18.254 255.255.255.0
!
interface Vlan19
ip address 192.168.19.254 255.255.255.0
!
ip route 0.0.0.0 0.0.0.0 192.168.10.1
ip http server
and for ping
R4506# ping 192.168.12.254
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.12.254, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
R4506#ping 192.168.12.253
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.12.253, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
GigabitEthernet3/1 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet Port, address is 0019.e8dc.a93a (bia 0019.e8dc.a9
3a)
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, link type is auto, media type is 1000BaseSX
input flow-control is off, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 3000 bits/sec, 6 packets/sec
219366451 packets input, 225825860193 bytes, 0 no buffer
Received 54690 broadcasts (50399 multicast)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
109350918 packets output, 7672967219 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
i don't know how to config who can help
thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО06-26-2008 01:32 AM
тАО06-26-2008 01:32 AM
Re: vlan trunk
vlan 1
name "DEFAULT_VLAN"
untagged 37-48,50
ip address 192.168.12.253 255.255.255.0
no untagged 1-36
tagged 49******************
exit
2650(config)#vlan 1
2650config-vlan1)#untag 49
vlan 1
name "DEFAULT_VLAN"
untagged 37-48,49,50***********
ip address 192.168.12.253 255.255.255.0
no untagged 1-36
exit
after retest ping
cenk
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО06-29-2008 05:58 PM
тАО06-29-2008 05:58 PM
Re: vlan trunk
here is my show run
hostname "ProCurve Switch 2650"
ip default-gateway 192.168.12.254
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-48,50
ip address 192.168.12.253 255.255.255.0
tagged 49
exit
ProCurve Switch 2650(config)# ping 192.168.12.254
Target did not respond.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО06-30-2008 02:23 AM
тАО06-30-2008 02:23 AM
Re: vlan trunk
interface 49 on procurve must be vlan 1 untag member
config(vlan1)#untagged 49 enter.....
cenk
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО06-30-2008 02:38 AM
тАО06-30-2008 02:38 AM
Re: vlan trunk
cisco switch vlan 1 network address 192.168.10.0
procurve switch vlan 1 ip address must be same network
for example:192.168.100.253/24
please look be carefully below config and make test
cisco switch vlan config
interface Vlan1
ip address 192.168.100.254 255.255.255.0
!
interface Vlan10
ip address 192.168.10.254 255.255.255.0
!
interface Vlan12
ip address 192.168.12.254 255.255.255.0
!
interface Vlan13
ip address 192.168.13.254 255.255.255.0
!
interface Vlan14
ip address 192.168.14.254 255.255.255.0
ip access-group 114 in
!
interface Vlan17
ip address 192.168.17.254 255.255.255.0
!
interface Vlan18
ip address 192.168.18.254 255.255.255.0
!
interface Vlan19
ip address 192.168.19.254 255.255.255.0
!
ip route 0.0.0.0 0.0.0.0 192.168.10.1
cisco uplink port to procurve switch
interface GigabitEthernet3/1
switchport trunk encapsulation dot1q
switchport mode trunk
!
*****************************************
procurve vlan config
vlan 1
name "DEFAULT_VLAN"
untagged 37-48,49,50
ip address 192.168.100.253 255.255.255.0
no untagged 1-36
exit
vlan 17
name "vlan17"
untagged 1-12
tagged 49
exit
vlan 18
name "vlan18"
untagged 13-22
tagged 49
exit
vlan 19
name "vlan19"
untagged 23-36
tagged 49
exit
int 49 procurve uplink port to cisco switch
********************************************
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО06-30-2008 02:40 AM
тАО06-30-2008 02:40 AM
Re: vlan trunk
************************
hi
cisco switch vlan 1 network address 192.168.100.0*****
procurve switch vlan 1 ip address must be same network
for example:192.168.100.253/24
please look be carefully below config and make test
cisco switch vlan config
interface Vlan1
ip address 192.168.100.254 255.255.255.0
!
interface Vlan10
ip address 192.168.10.254 255.255.255.0
!
interface Vlan12
ip address 192.168.12.254 255.255.255.0
!
interface Vlan13
ip address 192.168.13.254 255.255.255.0
!
interface Vlan14
ip address 192.168.14.254 255.255.255.0
ip access-group 114 in
!
interface Vlan17
ip address 192.168.17.254 255.255.255.0
!
interface Vlan18
ip address 192.168.18.254 255.255.255.0
!
interface Vlan19
ip address 192.168.19.254 255.255.255.0
!
ip route 0.0.0.0 0.0.0.0 192.168.10.1
cisco uplink port to procurve switch
interface GigabitEthernet3/1
switchport trunk encapsulation dot1q
switchport mode trunk
!
*****************************************
procurve vlan config
vlan 1
name "DEFAULT_VLAN"
untagged 37-48,49,50
ip address 192.168.100.253 255.255.255.0
no untagged 1-36
exit
vlan 17
name "vlan17"
untagged 1-12
tagged 49
exit
vlan 18
name "vlan18"
untagged 13-22
tagged 49
exit
vlan 19
name "vlan19"
untagged 23-36
tagged 49
exit
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО07-02-2008 05:08 PM
тАО07-02-2008 05:08 PM
Re: vlan trunk
the some French people remote config
This is show run
hostname "ProCurve Switch 2650"
ip default-gateway 192.168.100.254
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 37-48
tagged 49
ip address 192.168.100.253 255.255.255.0
no untagged 1-36
exit
vlan 17
name "vlan17"
untagged 1-12
ip address 192.168.17.254 255.255.255.0
tagged 49
exit
vlan 18
name "vlan18"
untagged 13-22
ip address 192.168.18.254 255.255.255.0
tagged 49
exit
vlan 19
name "vlan19"
untagged 23-36
ip address 192.168.19.254 255.255.255.0
tagged 49
exit
gvrp
I think gvrp is key command in this issue
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО07-02-2008 10:40 PM
тАО07-02-2008 10:40 PM
Solutionnoting gvrp key command
gvrp command for dynamic vlan on switch
gvrp command unnecessary this configuration
you omit test my config
my config desciribe int 49 vlan 1 untag member on procurve switch
please read this guide very ideal for you
http://www.tecnocael.it/ftp/docs/ProCurve_Cisco.pdf