Switches, Hubs, and Modems
1748254 Members
4208 Online
108760 Solutions
New Discussion

w2k3 IAS Radius and procurve switches

 
sphar
Advisor

w2k3 IAS Radius and procurve switches

Hi everyone,

I'm wanting to setup IAS on windows 2003 so I can telnet to procurve 2848's and 2524's using AD login credentials.

Do I need to setup each procurve switch in IAS as a 'radius client' ?

Thanks.

procurve switch IAS config below

aaa authentication telnet login radius local
aaa authentication telnet enable radius local

radius-server host IP_IAS_server key xxx
aaa authentication num-attempts 3
radius-server dead-time 5
radius-server timeout 3
radius-server retransmit 2

aaa accounting exec start-stop radius
aaa accounting system stop-only radius
aaa accounting network start-stop radius
aaa accounting update periodic 10
aaa accounting suppress null-username
1 REPLY 1
cenk sasmaztin
Honored Contributor

Re: w2k3 IAS Radius and procurve switches

hi sphar

you config true...

you see whatever problem during establish telnet connection.

please check your config show command
*show accounting :current accounting status and enable methods
*show radius accounting :list a summary of accounting statistic
*show accounting sessions:list a summary of currently active sessions

you wantsee more log info radius server log

good luck
cenk