Switching and Routing
1748198 Members
2578 Online
108759 Solutions
New Discussion

Re: Aruba 2920 48G POE+ (J9729A) Upgrade

 
SOLVED
Go to solution
mloiterman
Occasional Contributor

Aruba 2920 48G POE+ (J9729A) Upgrade

I have two Aruba 2920 48G POE+ Switch (J9729A) running:

WB.15.15.0014

ROM WB.15.05 

 

I'm wondering which firmware I can safely update to or can I just upgrade to the latest version?

3 REPLIES 3
Ivan_B
HPE Pro
Solution

Re: Aruba 2920 48G POE+ (J9729A) Upgrade

Hello!

You can update to the latest version WB.16.04.0016, bootrom will be updated automatically as well.

IMPORTANT: During the software update, the switch will automatically boot twice. The switch
will update the primary BootROM, then reboot, and then update the secondary BootROM. After
the switch flash memory is updated and the final boot is initiated, no additional user intervention
is needed. Do not interrupt power to the switch during this important update.

Before the update, please, check "Best practices for software updates" section of this document - https://support.hpe.com/hpesc/public/docDisplay?docId=c05161695

 

I am an HPE employee

Accept or Kudo

BRINKHAUS
New Member

Re: Aruba 2920 48G POE+ (J9729A) Upgrade

From where I can download latest firmware for Switches 2920 and 2910 ?

 

Ivan_B
HPE Pro

Re: Aruba 2920 48G POE+ (J9729A) Upgrade

You can find it here - https://h10145.www1.hpe.com/support/SupportLookUp.aspx

 

I am an HPE employee

Accept or Kudo