How to check if QoS is enable - HP A5500 EI

[LuizEduardo_BR]

Hello HPE forum, I am working on replacing old switches in a new environment and these switches have an old configuration that I have no idea if it is still working.

Here is a sample configuration:
acl number 3001
 description BLOQUEIO_PADRAO
 rule 1 deny ip destination 10.0.0.0 0.255.255.255
 rule 2 permit udp destination 10.4.9.20 0 destination-port eq dns
 rule 3 permit tcp destination 10.4.9.20 0 destination-port eq domain
 rule 4 permit udp destination 10.4.9.21 0 destination-port eq dns
 rule 5 permit tcp destination 10.4.9.21 0 destination-port eq domain
 rule 6 permit icmp destination 10.4.2.0 0.0.0.255
#
acl number 3997
 rule 0 permit ip dscp ef
 rule 1 permit tcp destination-port eq www
 rule 2 permit udp destination-port eq snmp
 rule 3 permit udp destination-port eq snmptrap
 rule 4 permit ip dscp cs6
 rule 5 permit ip dscp cs7
#
acl number 4999
 rule 0 permit type 8868 ffff
 rule 1 permit source 00e0-bb00-0000 ffff-ff00-0000
 rule 2 permit source 0003-6b00-0000 ffff-ff00-0000
 rule 3 permit source 00e0-7500-0000 ffff-ff00-0000
 rule 4 permit source 00d0-1e00-0000 ffff-ff00-0000
 rule 5 permit source 0001-e300-0000 ffff-ff00-0000
 rule 6 permit source 000f-e200-0000 ffff-ff00-0000
 rule 7 permit source 0006-b900-0000 ffff-ff00-0000
 rule 8 deny dest 0000-0000-0000 ffff-ffff-ffff
#
qos-profile default
 packet-filter inbound link-group 4999 rule 8
 traffic-priority inbound ip-group 3997 rule 0 cos voice
 traffic-priority inbound ip-group 3997 rule 4 cos network-management
 traffic-priority inbound ip-group 3997 rule 5 cos network-management
 traffic-priority inbound link-group 4999 rule 0 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 1 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 2 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 3 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 4 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 5 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 6 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 7 dscp ef cos voice
qos-profile bloqueio
 packet-filter inbound ip-group 3001 rule 1
 packet-filter inbound ip-group 3001 rule 2
 packet-filter inbound ip-group 3001 rule 3
 packet-filter inbound ip-group 3001 rule 4
 packet-filter inbound ip-group 3001 rule 5
 packet-filter inbound ip-group 3001 rule 6

and here the configuration of interfaces:

#
interface Ethernet1/0/3
 stp edged-port enable
 port link-type trunk
 port trunk permit vlan 1 5 99
 broadcast-suppression pps 3000
 description WIFI
 apply qos-profile default
#
interface Ethernet1/0/4
 stp edged-port enable
 port link-type trunk
 port trunk permit vlan 1 5 99
 broadcast-suppression pps 500
 undo jumboframe enable
 apply qos-profile default

#
interface Ethernet1/0/18
 poe enable
 stp edged-port enable
 broadcast-suppression pps 500
 port access vlan 333
 undo jumboframe enable
 apply qos-profile default
 apply qos-profile bloqueio

I have to wonder if these qos are still working because I'm going to have to replace the whole configuration for the new switches, but I do not want to copy the unnecessary configuration.

Thanks for help!

[network_king]

Hello LuixEduardo_BR

You may please use below guide for qos configuration

https://support.hpe.com/hpsc/doc/public/display?sp4ts.oid=5202306&docLocale=en_US&docId=emr_na-c02644504&withFrame