Switching and Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

Source address for OOBM NTP? NTP and ping will not work with specifiing source IP of the OOBM interf

 
Highlighted
Occasional Visitor

Source address for OOBM NTP? NTP and ping will not work with specifiing source IP of the OOBM interf

I have an OOBM address and default route on my switch. But to ping from it I have to specify the source, and NTP will not work.  Here are some relevent snippets from the config.

 

ntp unicast

ntp server 10.17.89.7 iburst

ntp server 10.17.89.9

ntp server 10.17.90.9

ntp enable

no telnet-server

time daylight-time-rule continental-us-and-canada

 

oobm

   ip address 10.18.90.10 255.255.255.0

   ip default-gateway 10.18.90.1

   exit

vlan 1

   name "DEFAULT_VLAN"

   no untagged 1-48,Trk1

   no ip address

   exit

vlan 89

   name "DATA"

   untagged 1-48,Trk1

   no ip address

   ip helper-address 10.17.89.7

   exit

 

 

1 REPLY 1
Highlighted
HPE Pro

Re: Source address for OOBM NTP? NTP and ping will not work with specifiing source IP of the OOBM in

Hello Binkoba,

For OOBM configuration please use below guide.

http://h22208.www2.hpe.com/eginfolib/networking/docs/switches/WB/15-18/5998-8162_wb_2920_mcg/content/apb.html 

 

I am an HPE Employee

Accept or Kudo