Switching and Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

Vlan and trunk

 
Tonyissa87
Occasional Visitor

Vlan and trunk

Hello every one
If I had two switch and I want to make trunk between them
-Do I need to make trunk configure on the two switch or one ??
- what the different between trunk maged abd untagged trunk for vlan??
- can I make trunk to carry only one vlan from the two vlan??
Thanks
1 REPLY
Vince-Whirlwind
Honored Contributor

Re: Vlan and trunk

You should setup your trunk config on both switches.

An interface providing a link to another switch can carry at most one untagged VLAN, and any number of tagged VLANs.
Both sides should be configured with the same untagged VLAN (if any) and the same tagged VLANs.