Switching and Routing

Re: trying to setup 4210g for iscsi

al eman
Occasional Advisor

trying to setup 4210g for iscsi

hi there,

I'm trying to setup 2x 4210Gs to be used for iSCSI traffic between 2 servers and a SAN.

I've created 2 different vlans on the switch but I'm having problems

a) creating uplinks that will allow traffic from both vlans

b) creating aggregate uplinks for the above

Has anyone done this and can they advise me how this can be done? Some example code would be great ;-)

Thanks for any assistance,


al eman
Occasional Advisor

Re: trying to setup 4210g for iscsi

ok I think I have figured it out.

There's an example here if anyone else is trying to do this: