11.31 Install

[Nyck_1]

Well I finally got round to rebuilding the server and this time all was ok. I checked for the /etc/securetty file and this did not exist. I think what I did was to install everything by accident hence ending up with the trusted install.

Once built I noticed that LVM is a bit different, for example:-

/dev/vg00
/dev/disk/disk3_p2
/dev/vg_proj
/dev/dsk/c2t1d0


The disk used for the root volume group is disk3_p2. As you can see I created a volume group called proj and used the legacy naming convention. Is this ok?

There were no errors during the process and all seesm fine.

[Michal Kapalka (mikap)]

hi

//
The disk used for the root volume group is disk3_p2. As you can see I created a volume group called proj and used the legacy naming convention. Is this ok?

There were no errors during the process and all seesm fine.
//

yes from config view its ok, but i would use only one type of devices, but its always on the administrator what they like to do.

mikap

[Nyck_1]

I'm happy now:-)

If and when I create additional volume groups I will use the new naming convention.