System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

11.31 autochgr path not showing up

 
Tonya Underwood
Regular Advisor

11.31 autochgr path not showing up

[root@bdhp6280:/root]
# ioscan -N -kfnH0/3/0/0/0/1
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
fc 5 0/3/0/0/0/1 fclp CLAIMED INTERFACE HP AD355-60001 4Gb PCIe 2-port Fibre Channel Adapter
/dev/fclp5
tgtpath 4 0/3/0/0/0/1.0x100000e002235a53 estp NO_HW TGT_PATH fibre_channel target served by fclp driver, target port id 0x10200
lunpath 20 0/3/0/0/0/1.0x100000e002235a53.0x0 eslpt NO_HW LUN_PATH LUN path for autoch1
tgtpath 25 0/3/0/0/0/1.0x2001001321440e8c estp NO_HW TGT_PATH fibre_channel target served by fclp driver, target port id 0x11200
lunpath 162 0/3/0/0/0/1.0x2001001321440e8c.0x0 eslpt NO_HW LUN_PATH LUN path for tape24
tgtpath 26 0/3/0/0/0/1.0x2004001321440e8c estp NO_HW TGT_PATH fibre_channel target served by fclp driver, target port id 0x12200
lunpath 164 0/3/0/0/0/1.0x2004001321440e8c.0x0 eslpt NO_HW LUN_PATH LUN path for tape26
tgtpath 27 0/3/0/0/0/1.0x2007001321440e8c estp NO_HW TGT_PATH fibre_channel target served by fclp driver, target port id 0x13200
lunpath 163 0/3/0/0/0/1.0x2007001321440e8c.0x0 eslpt NO_HW LUN_PATH LUN path for tape25

[root@bdhp6280:/root]
# scsimgr -v -f replace_wwid -C tgtpath -I 4
Binding of LUN path 0/3/0/0/0/1.0x100000e002235a53.0x0 with new LUN validated successfully

[root@bdhp6280:/root]
# scsimgr get_info -H 0/3/0/0/0/1.0x100000e002235a53.0x0

STATUS INFORMATION FOR LUN PATH : 0/3/0/0/0/1.0x100000e002235a53.0x0

Generic Status Information

SCSI services internal state = UNOPEN
Open close state = FAILED
Protocol = fibre_channel
EVPD page 0x83 description code = 2
EVPD page 0x83 description association = 0
EVPD page 0x83 description type = 1
World Wide Identifier (WWID) = "HP ESL E-Series HPE620368001"
Total number of Outstanding I/Os = 0
Maximum I/O timeout in seconds = 30
Maximum I/O size allowed = 2097152
Maximum number of active I/Os allowed = 1
Maximum queue depth = 1
Queue full delay count = 0
Asymmetric state = NA
Device preferred path = No
Relative target port identifier = NA
Target port group identifier = NA

[root@bdhp6280:/root]
#


But it seems to be accessible, I cannot get it to show up claimed

Thank You,
Tonya
3 REPLIES
Patrick Wallek
Honored Contributor

Re: 11.31 autochgr path not showing up

What happens if you run your ioscan without the '-k' switch? The '-k' queries the kernel for the last know state of the device.

Perhaps running a full scan will show something different.

ioscan -N -fnH 0/3/0/0/0/1
Tonya Underwood
Regular Advisor

Re: 11.31 autochgr path not showing up

Yeah, I know... same think without querying kernel.

[root@bdhp6280:/root]
# ioscan -N -fnH0/3/0/0/0/1
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
fc 5 0/3/0/0/0/1 fclp CLAIMED INTERFACE HP AD355-60001 4Gb PCIe 2-port Fibre Channel Adapter
/dev/fclp5
tgtpath 4 0/3/0/0/0/1.0x100000e002235a53 estp NO_HW TGT_PATH fibre_channel target served by fclp driver, target port id 0x10200
lunpath 20 0/3/0/0/0/1.0x100000e002235a53.0x0 eslpt NO_HW LUN_PATH LUN path for autoch1
tgtpath 25 0/3/0/0/0/1.0x2001001321440e8c estp NO_HW TGT_PATH fibre_channel target served by fclp driver, target port id 0x11200
lunpath 162 0/3/0/0/0/1.0x2001001321440e8c.0x0 eslpt NO_HW LUN_PATH LUN path for tape24
tgtpath 26 0/3/0/0/0/1.0x2004001321440e8c estp NO_HW TGT_PATH fibre_channel target served by fclp driver, target port id 0x12200
lunpath 164 0/3/0/0/0/1.0x2004001321440e8c.0x0 eslpt NO_HW LUN_PATH LUN path for tape26
tgtpath 27 0/3/0/0/0/1.0x2007001321440e8c estp NO_HW TGT_PATH fibre_channel target served by fclp driver, target port id 0x13200
lunpath 163 0/3/0/0/0/1.0x2007001321440e8c.0x0 eslpt NO_HW LUN_PATH LUN path for tape25

[root@bdhp6280:/root]
#
Tonya Underwood
Regular Advisor

Re: 11.31 autochgr path not showing up

Status of device


Target N_Port_id = 0x010200
Target state = PLOGI
Symbolic Name = HP NS E2400FC-4G 5944
Port Type = N_PORT
FCP-2 Support = YES
Target Port World Wide Name = 0x100000e002235a53
Target Node World Wide Name = 0x100000e002035a53



Note that status is PLOGI not ONLINE