System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

11iv3 cold install hung on rx8640

SOLVED
Go to solution
Toomas Kask
Occasional Contributor

11iv3 cold install hung on rx8640

Appreciate any help.
HP-UX 11iv3 cold install on free hard disk hung after the half of filesets are installed.

MP Event Log show:
6650 SFW 0,1,0 *3 6480031c10e0124a 00ffff01ff3bff74 MEM_DIMM_FAILED
6651 SFW 0,1,0 2 448001d210e0124c 00ffff01ff3aff74 MEM_DIMM_HW_DEALLOCATED
6652 SFW 0,1,0 *3 6b000efd1020124e 010000004a5bf1ce CELL_HW_DEGRADED

Starting HP-UX 11iv2 was normal and now is working on that machine 5 Oracle databases without errors...thanks, Toomas
5 REPLIES
Ganesan R
Honored Contributor
Solution

Re: 11iv3 cold install hung on rx8640

Hi,

You have some memory related hardware issue on the cell board. Involve HP to analyse the logs and replace the failed hardware.

>>Starting HP-UX 11iv2 was normal and now is working on that machine 5 Oracle databases without errors...<<

Have you checked total amount of memory before and now in the 11iV2 ?
Best wishes,

Ganesh.
Michal Kapalka (mikap)
Honored Contributor

Re: 11iv3 cold install hung on rx8640

hi,

you have a HW problem, you lost part of your memory.

mikap

PS : call to HP for HW support or boot ofline diagnostic cd and make memory check if you have a password for this ( HP confidential )
Toomas Kask
Occasional Contributor

Re: 11iv3 cold install hung on rx8640

Thanks,

Before was 64GB and now 41GB.
I will contact with HP Support.
Toomas
Toomas Kask
Occasional Contributor

Re: 11iv3 cold install hung on rx8640

Thanks for all fast answers.
Problem solution is discovered.

Toomas
Sunny123_1
Esteemed Contributor

Re: 11iv3 cold install hung on rx8640

Hi

Previously your memory was 64 GB and now it is 41 GB.So It is basically memry problem in your server.Invole Hp to analyse this.


Regards
Sunny