A6828A showing unclaimed

[Amy Baer]

We have just added a A6828A Ultra 160 card to our L class and N class system. The card is seen but showing unclaimed. We are running 11.0 on each system. Is there a driver or patch we need to have this card be claimed?

Thanks in advance.

[Floyd Curtis]

The driver is c8xx for the Ultra160 SCSI adapters -
check Sam=>kernel configuration=>drivers - if listed but not active, then enable and regen kernel. If not there, then you will need to install Hardware Enablement Bundle HWE-0203 bundle or later or install the
following patches:

PHKL_25014 s700_800 11.00 SCSI Ultra160 Driver
and
PHKL_25023 s700_800 11.00 PCI cumulative patch


Good luck,
fwc

[Sanjiv Sharma_1]

Hi Amy,

You need add c8xx driver to the Kernel and reboot.

If it is not available in the driver list in SAM then install the Hardware Enablement Patches for HP-UX 11.00, September 2003 patch.

You can download the same from
http://www2.itrc.hp.com/service/patch/releasePage.do?BC=patch.breadcrumb.main|patch.breadcrumb.bundle|patch.breadcrumb.releaseIndexPage|&releaseId=5012-7886

hth.

[Floyd Curtis]

ooops - one more thing
for sam to support the ultra 160 card you will need this patch.

PHCO_27375 s700_800 11.00 cumulative SAM/ObAM patch

Good luck and enjoy your new card.
fwc