Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
System Administration
Showing results for 
Search instead for 
Did you mean: 

Adding stape "driver" to my 10.20 hp-ux

Occasional Contributor

Adding stape "driver" to my 10.20 hp-ux

Hello to all.

This is my first post.

Im working with a beautiful Logic Analyzer 16702A.

I would like to add DLT support at my workstation (9000/779)

With Sam but even with  mk_kernel after added stape at the end of file system i get this error:


stand/build # more out.txt
/usr/ccs/bin/ld: Unsatisfied symbols:
set_caps_light (code)
/usr/ccs/bin/ld: (Warning) Linker features were used that may not be supported i
n future releases. The +vallcompatwarnings option can be used to display more de
tails, and the ld(1) man page contains additional information. This warning can
be suppressed with the +vnocompatwarnings option.

config: make did an exit(1)


Any hints?

Really thanks.