HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
Showing results for 
Search instead for 
Did you mean: 

Adding stape "driver" to my 10.20 hp-ux

Occasional Contributor

Adding stape "driver" to my 10.20 hp-ux

Hello to all.

This is my first post.

Im working with a beautiful Logic Analyzer 16702A.

I would like to add DLT support at my workstation (9000/779)

With Sam but even with  mk_kernel after added stape at the end of file system i get this error:


stand/build # more out.txt
/usr/ccs/bin/ld: Unsatisfied symbols:
set_caps_light (code)
/usr/ccs/bin/ld: (Warning) Linker features were used that may not be supported i
n future releases. The +vallcompatwarnings option can be used to display more de
tails, and the ld(1) man page contains additional information. This warning can
be suppressed with the +vnocompatwarnings option.

config: make did an exit(1)


Any hints?

Really thanks.