System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

AdvFS I/O error: on V4.0 1229 alpha

李俊賢
Occasional Advisor

AdvFS I/O error: on V4.0 1229 alpha

Hi every one
I find some error message on DS20 /var/adm/messages ,about AdvFS I/O error.I check the file system find one domain lose.I think this local disk need to replace can anyone give me the detail solution.
Thanks for your help!
5 REPLIES
Venkatesh BL
Honored Contributor

Re: AdvFS I/O error: on V4.0 1229 alpha

Yes, looks like "/dev/rz13c" has gone bad.
李俊賢
Occasional Advisor

Re: AdvFS I/O error: on V4.0 1229 alpha

Dear Venkatesh BL

Thank you
Yes, the hard disk need to replace
I search some document and solve this problem.

1.replace the bad disk
2.#scu scan edt
3.#scu show edt (find device)
4.use #diskconfig to partition disk
5.#rm -fr /etc/fdmns/data3_domain
6.#mkfdmn /dev/rz13c data3_domain
7.#mkfset data3_domain data3
8.#mount -t advfs data3_domain#data3 /data3
Marco A.
Esteemed Contributor

Re: AdvFS I/O error: on V4.0 1229 alpha

Hello,


You have a bad disk right there, you need to replace it.

Disk is dead. Replace it they are too cheap to worry about these days.

Regards,

Marco
Just unplug and plug in again ....
李俊賢
Occasional Advisor

Re: AdvFS I/O error: on V4.0 1229 alpha

Dear Marco

Thank you. I solve this problem.
李俊賢
Occasional Advisor

Re: AdvFS I/O error: on V4.0 1229 alpha

1.replace the bad disk
2.#scu scan edt
3.#scu show edt (find device)
4.use #diskconfig to partition disk
5.#rm -fr /etc/fdmns/data3_domain
6.#mkfdmn /dev/rz13c data3_domain
7.#mkfset data3_domain data3
8.#mount -t advfs data3_domain#data3 /data3