cancel
Showing results for 
Search instead for 
Did you mean: 

Analyze the disk in HPUX

cnhpux01
Occasional Contributor

Analyze the disk in HPUX

Hi,

 

in HPUX, is there command or utility that can run to analyze the hard disk?

 

Like Solaris, the format command can run to analyze the drive.

 

Thanks,

 

-C

1 REPLY
Matti_Kurkela
Honored Contributor

Re: Analyze the disk in HPUX

Which HP-UX version?

 

In general, the on-line diagnostics tools can get some disk health information.

In HP-UX 11.11 and 11.23, this would be the cstm/mstm/xstm commands.

 

Modern disks (basically everything manufactured since year 1995 at least) have a built-in hidden reserve of spare sectors: as long as this reserve has not run out, the disk should have no bad blocks visible to the OS. The presence of bad blocks usually indicates this reserve has already been exhausted, so the disk already has a pretty severe fault.

 

A basic check would be to read the whole disk using the dd command and see if it causes any errors, either on the command line or in the syslog:

dd if=<disk device> of=/dev/zero bs=1024k
more /var/adm/syslog/syslog.log

 

MK