Operating System - HP-UX
1748117 Members
3693 Online
108758 Solutions
New Discussion юеВ

Re: B2600 workstation reboot

 
SOLVED
Go to solution
guoleijie
Occasional Advisor

B2600 workstation reboot

A B2600 workstation continues reboot,and i view the sc_system.log, the sc_system.log said "DTSESSION: pamauthenticate status=9"
how to solve this problem


guo thanks
12 REPLIES 12
V. Nyga
Honored Contributor
Solution

Re: B2600 workstation reboot

Hi,

see 'man pam' and 'man pam_authenticate'
It's from a wrong password of a user.

See also:
http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=942027

Do you have a support?
Then you can view tese documents:
http://www11.itrc.hp.com/service/cki/docDisplay.do?docLocale=de&docId=KBRC00000474

http://www11.itrc.hp.com/service/cki/docDisplay.do?docLocale=de&docId=KBRC00002457

If it's during boot, then it's strange ...

Is it a new installation?
Which os?

Volkmar
*** Say 'Thanks' with Kudos ***
guoleijie
Occasional Advisor

Re: B2600 workstation reboot

1.it is not new installation and runing several years
2.its softversion is
B.11.08
V. Nyga
Honored Contributor

Re: B2600 workstation reboot

Hi again,

give us 'uname -a' please.

Do you have NFS configured?
Where is 'sc_system.log' from?

What's about rc.log, syslog, Xerror?
(That's the logs I know)

Was anything change recently?
At which point is the error?
Any login to another ws?

V.
*** Say 'Thanks' with Kudos ***
guoleijie
Occasional Advisor

Re: B2600 workstation reboot

Jitesh purohit_1
Regular Advisor

Re: B2600 workstation reboot

Hi,

Please can you check the following

1) if your server is booting continues, Did you checked your reboot option is set to true or false .

2) Does the crashdump is configured to generate the memory dump either if

a) if its a Hardware issue ( HPMC , LPMC ), Then it will be stored under /var/adm/tombstones/tsxx file

b) If its a software / OS issue,

/var/adm/crash/crashxx

If you find any crashdump, Then consult HP for further Analysis

Thanks
Jitesh
guoleijie
Occasional Advisor

Re: B2600 workstation reboot

Hi all:
1>
# uname -a
HP-UX mvt B.11.00 A 9000/785 2003264786 two-user license
2>etc_rc.log Xerrors syslog.log and so on please view attaches
3>/var/adm/crash/crashxx is nothing
V. Nyga
Honored Contributor

Re: B2600 workstation reboot

Hi again,

ok, the docs only say that 'pamauthenticate status=9' means /* Authentication failure */ and how to turn messages off.

Your syslog starts at July 3rd, 2007, so your ws is running almost 2 years, right?

You have the message '"DTSESSION: pamauthenticate status=9" ' since 2007 so it's not your problem.

So we don't talk about reboots, but maybe continuely restarting the CDE?

But your Xerrors are also from 2007, nothing new ... no restart messages.

Can you descripe your problem once again?

V.
*** Say 'Thanks' with Kudos ***
guoleijie
Occasional Advisor

Re: B2600 workstation reboot

i could not collect the lastest information about B2600


if it is caused by CDE,what can i do at next
guoleijie
Occasional Advisor

Re: B2600 workstation reboot

And what are differences between system reboot and CDE reboot