cancel
Showing results for 
Search instead for 
Did you mean: 

BL870 and problems to boot

Ludovic Derlyn
Esteemed Contributor

BL870 and problems to boot

hi,

Very strange, i have an bl870c installed with hpux11iv3
Sometimes boot is ok, sometimes not ok, blocked !
never on same level ! (configuring PPOE, checking user databaseor other)
interconnected with netApp,i have tested to change alternate and primary boot same result
i have tested the disk by dd, all it's ok..

very strange !

in SL, i have a watchdog expired...

8 HPUX 0 2 0x54801C2F00E000D0 0000000000001001 HP-UX_BOOT_COMPLETE
01 Jul 2009 12:32:25
7 SFW 0 2 0x40801CBB00E000B0 0000000000000000 BOOT_SWITCH_INSECURE_MODE
01 Jul 2009 12:23:15
6 SFW 0 2 0x5480006300E00090 0000000000000000 BOOT_START
01 Jul 2009 12:22:44
5 SFW 2 0xC14A4B5514020080 FFFF000A001D0300 CPU_START_BOOT
01 Jul 2009 12:22:44
4 BMC 2 0x204A4B5503020070 FFFF027000120300 SOFT_RESET
01 Jul 2009 12:22:27
3 BMC 2 0x204A4B5503020060 0183A37000120300 CHASSIS_CONTROL_REQUEST
01 Jul 2009 12:22:27
2 BMC 2 0x204A4B52A8020050 FF04C06F0C230300 WATCHDOG_EXPIRED
01 Jul 2009 12:12:24
1 HPUX 0 2 0x54801C2F00E00030 0000000000001001 HP-UX_BOOT_COMPLETE
01 Jul 2009 12:00:55

and event, i have mem_sbe_err, perhaps an memory error ?

300 HPUX 2 1 0x3F00033A02E00000 00000000000CF04F HP-UX_HEX_RUN_CODE
299 HPUX 0 2 0x54801C2F00E000D0 0000000000001001 HP-UX_BOOT_COMPLETE
01 Jul 2009 12:32:25
298 HPUX 0 1 0x3F00033300E00000 000000000006CEF8 HP-UX_START_INIT
297 HPUX 0 1 0x3F00033200E00000 000000000006CEF6 HP-UX_START_PAGE_OUT_DAEMON
296 HPUX 0 1 0x3F00033100E00000 000000000006CEF4 HP-UX_MOUNT_ROOT_FS
295 HPUX 0 1 0x3F00032F00E00000 000000000006CEF2 HP-UX_START_2ND_LVL_IO_CONFIG
294 HPUX 0 1 0x3F00032E00E00000 000000000006CEF0 HP-UX_MAIN_ENTERED
293 SFW 0 1 0x24001C7D00E00000 FFFFFFFF001BFF74 MEM_SBE_CORR_ERR
292 SFW 0 1 0x24001C7D00E00000 FFFFFFFF001BFF74 MEM_SBE_CORR_ERR
291 SFW 0 1 0x24001C7D00E00000 FFFFFFFF001BFF74 MEM_SBE_CORR_ERR
290 SFW 0 1 0x24001C7D00E00000 FFFFFFFF001BFF74 MEM_SBE_CORR_ERR
289 SFW 0 1 0x24001C7D00E00000 FFFFFFFF001BFF74 MEM_SBE_CORR_ERR

regards
L-DERLYN
4 REPLIES
Steven E. Protter
Exalted Contributor

Re: BL870 and problems to boot

Shalom,

Still looks like a disk problem from here.

Try:
cstm mstm xstm
Your choice

exercise the disk. If it comes up red, ignite backup and replace the disk.

If its a SAN boot, check the fiber media, hba card and switch configuration.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Ludovic Derlyn
Esteemed Contributor

Re: BL870 and problems to boot

Hi steven,

I would use stm or others but boot is blocked !
What is MEM_SBE_CORR_ERR ?
i have changed primary disk with secondary, same result
Boot is not on the SAn,i have checked and modified fc driver drvcfg -v in efi menu too stop search bootable disk when initialise FC

regards
L-derlyn
Ludovic Derlyn
Esteemed Contributor

Re: BL870 and problems to boot

Ganesan R
Honored Contributor

Re: BL870 and problems to boot

Hi,

I would suggest you to involve HP to decode the bootup error codes.
Best wishes,

Ganesh.