System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Bad configuration detected for /stand and primary swap : disk and/or mirror.

AwadheshPandey
Honored Contributor

Bad configuration detected for /stand and primary swap : disk and/or mirror.

Dear Gurus,

I am geting alerts for most of my servers

"Bad configuration detected for /stand and primary swap : disk and/or mirror."

I need your expert suggestion for above error.

Thanks in Advance.

Regards,

Awadhesh
It's kind of fun to do the impossible
5 REPLIES
Torsten.
Acclaimed Contributor

Re: Bad configuration detected for /stand and primary swap : disk and/or mirror.

Where did you find this message?

First you should do a

# lvlnboot -v

and compare to /etc/fstab and vgdisplay output.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Analyst
Trusted Contributor

Re: Bad configuration detected for /stand and primary swap : disk and/or mirror.

Hi Awadesh,

>:"Bad configuration detected for /stand and primary swap : disk and/or mirror."

From where you got the error syslog or dmesg ?

Have tried any thing mentioned below .
1. To root disk mirroring
2. To increase the swap
3. To reconfigure the kernel..

revert with exact errors.

Thanks.
Analyst
AwadheshPandey
Honored Contributor

Re: Bad configuration detected for /stand and primary swap : disk and/or mirror.

I can See these messages in OVO.
It's kind of fun to do the impossible
skt_skt
Honored Contributor

Re: Bad configuration detected for /stand and primary swap : disk and/or mirror.

check from OVO side. what is getting checked and what match does trigger this error. I would say those may be customzised templates
Torsten.
Acclaimed Contributor

Re: Bad configuration detected for /stand and primary swap : disk and/or mirror.

>>

First you should do a

# lvlnboot -v

and compare to /etc/fstab and vgdisplay output.

Attach your results.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!