System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Booterror - Panic: CPU 0 e_get_config no ECU Data - NVR Error

Andreas Heinemann
Occasional Visitor

Booterror - Panic: CPU 0 e_get_config no ECU Data - NVR Error

Our old Box: DEC 2000 AXP - Modell PB30H-CY
hangs while Boottime in a Loop with the Message above (after Transport with 40h Power off)

OSF: 4.0D

What can we do? We need this Box (or a new one) for compiling...

Thanks a lot for your advice

Andreas

Dortmund - Germany
2 REPLIES
Michael Schulte zur Sur
Honored Contributor

Re: Booterror - Panic: CPU 0 e_get_config no ECU Data - NVR Error

Hi Andreas,

Do you get to the srm prompt?
Try to run the EISA configuration utility.
It looks like the volatile RAM has given up.

greetings,

Michael
Steven Schweda
Honored Contributor

Re: Booterror - Panic: CPU 0 e_get_config no ECU Data - NVR Error

> It looks like the volatile RAM has given up.

_Non_-volatile RAM?

If the system has a dead NVR[AM] battery,
then replacing it might be a good place to
start.

> [...] (or a new one) [...]

Probably almost anything would be faster.