Operating System - HP-UX
1748227 Members
4408 Online
108759 Solutions
New Discussion

Re: CDE on a rx2660 VGA port

 
Gary Cooper_1
Esteemed Contributor

CDE on a rx2660 VGA port

Can anyone point me at step-by-step instructions on how to get a CDE login prompt on a device attached to the VGA port on the rear of an rx2660.

Many thanks,

Gary
1 REPLY 1
Torsten.
Acclaimed Contributor

Re: CDE on a rx2660 VGA port

Try this:

Check /etc/dt/config/Xservers.
If last line is commented out as follows:

# * Local local@console /usr/bin/X11/X :0

remove '# ' and restart dtlogin:

# /sbin/init.d/dtlogin.rc stop
# /sbin/init.d/dtlogin.rc start

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!