System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

CPU Checking for HP UX (RX6600)

Sansoen Chumphunut
Frequent Contributor

CPU Checking for HP UX (RX6600)

1. How to check processor model ie. 9150N Processor ?
2. How to check L2 or L3 Cache memory ?
3. How to check MPIO for multipath software ?

Thanks for your help
5 REPLIES
Kapil Jha
Honored Contributor

Re: CPU Checking for HP UX (RX6600)

1)cstm/machinfo
2)cstm/machinfo
3)swlist

BR,
Kapil+
I am in this small bowl, I wane see the real world......
Yallappa
Occasional Advisor

Re: CPU Checking for HP UX (RX6600)

Use the following cstm command for details CPU information.

#cstm
cstm>selclass qualifier CPU
cstm>infolog
Torsten.
Acclaimed Contributor

Re: CPU Checking for HP UX (RX6600)

You will ot find "9150N" in any output, but you will find

# machinfo
CPU info:
8 Intel(R) Itanium 2 9100 series processors (1.6 GHz, 24 MB)
533 MT/s bus, CPU version A1
12 logical processors

...

note speed and cache!

# machinfo -v

will also tell you about the cache values.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
AVV
Super Advisor

Re: CPU Checking for HP UX (RX6600)

Hi,

#machinfo
#sam or smh
#cstm


Use the above commands/utilities to find the same
Steven E. Protter
Exalted Contributor

Re: CPU Checking for HP UX (RX6600)

Shalom,

Generally I take the output of the command:

model

And use it on http://docs.hp.com



SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com