Cannot ssh my server

[Bill Hassell]

It is very difficult to help you without any information:

>> Still the same result, and I have rebooted the server just to test and yet all the same.

Did you download the two packages from the links I provided?
Did you use swinstall in command line mode as I provided?
Did you run swjob as directed at the end of each each swinstall run?
Do you see any error message in /var/adm/syslog/syslog.log?

Can you provide the last 30 lines from each swinstall run?
Can you provide the output from swjob?

[3r]

Hi Bill,

My bad for providing a very limited information, below are the requested information form the question below.

Did you download the two packages from the links I provided? ==> Yes
Did you use swinstall in command line mode as I provided? ==> yes
Did you run swjob as directed at the end of each each swinstall run? ==> yes
Do you see any error message in /var/adm/syslog/syslog.log? ==> please see attached file

Can you provide the last 30 lines from each swinstall run?  ==> please see attached file
Can you provide the output from swjob?  ==> please see attached file

[3r]

Hi Bill, 

Sorry I cannot attached the file, below are the output of swinstall for OpenSSL:

# swinstall -s /var/tmp/mydepot/OPENSSL.DEPOT -x reinstall=true \*

======= 01/15/18 08:54:09 MET BEGIN swinstall SESSION
(non-interactive) (jobid=fr70vhvmh002-0093)

* Session started for user "root@fr70vhvmh002".

* Beginning Selection
* Target connection succeeded for "fr70vhvmh002:/".
* Source: /var/tmp/mydepot/OPENSSL.DEPOT
* Targets: fr70vhvmh002:/
* Software selections:
OpenSSL,r=A.01.00.01s.001,a=HP-UX_B.11.31_IA/PA,v=HP
fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.mt003,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.mt003,fa=HP-UX_B.11.31_IA/PA
fips_1_1_2.FIPS-DOC,r=FIPS-OPENSSL-1.1.2.mt003,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.mt003,fa=HP-UX_B.11.31_IA/PA
fips_1_1_2.FIPS-INC,r=FIPS-OPENSSL-1.1.2.mt003,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.mt003,fa=HP-UX_B.11.31_IA/PA
fips_1_1_2.FIPS-LIB,r=FIPS-OPENSSL-1.1.2.mt003,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.mt003,fa=HP-UX_B.11.31_IA
fips_1_1_2.FIPS-MAN,r=FIPS-OPENSSL-1.1.2.mt003,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.mt003,fa=HP-UX_B.11.31_IA/PA
fips_1_1_2.FIPS-MIS,r=FIPS-OPENSSL-1.1.2.mt003,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.mt003,fa=HP-UX_B.11.31_IA/PA
fips_1_1_2.FIPS-RUN,r=FIPS-OPENSSL-1.1.2.mt003,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.mt003,fa=HP-UX_B.11.31_IA
fips_1_1_2.FIPS-SRC,r=FIPS-OPENSSL-1.1.2.mt003,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.mt003,fa=HP-UX_B.11.31_IA/PA
fips_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.2.zf03,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.2.zf03,fa=HP-UX_B.11.31_IA/PA
fips_1_2.FIPS-DOC,r=FIPS-OPENSSL-1.2.zf03,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.2.zf03,fa=HP-UX_B.11.31_IA/PA
fips_1_2.FIPS-INC,r=FIPS-OPENSSL-1.2.zf03,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.2.zf03,fa=HP-UX_B.11.31_IA/PA
fips_1_2.FIPS-LIB,r=FIPS-OPENSSL-1.2.zf03,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.2.zf03,fa=HP-UX_B.11.31_IA
fips_1_2.FIPS-MAN,r=FIPS-OPENSSL-1.2.zf03,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.2.zf03,fa=HP-UX_B.11.31_IA/PA
fips_1_2.FIPS-MIS,r=FIPS-OPENSSL-1.2.zf03,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.2.zf03,fa=HP-UX_B.11.31_IA/PA
fips_1_2.FIPS-RUN,r=FIPS-OPENSSL-1.2.zf03,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.2.zf03,fa=HP-UX_B.11.31_IA
fips_1_2.FIPS-SRC,r=FIPS-OPENSSL-1.2.zf03,a=HP-UX_B.11.31_IA/PA,v=HP,fr=FIPS-OPENSSL-1.2.zf03,fa=HP-UX_B.11.31_IA/PA
fips_2_0_5.FIPS-CONF,r=FIPS-OPENSSL-2.0.5.s001,a=HP-UX_B.11.31_IA,v=HP,fr=FIPS-OPENSSL-2.0.5.s001,fa=HP-UX_B.11.31_IA
fips_2_0_5.FIPS-DOC,r=FIPS-OPENSSL-2.0.5.s001,a=HP-UX_B.11.31_IA,v=HP,fr=FIPS-OPENSSL-2.0.5.s001,fa=HP-UX_B.11.31_IA
fips_2_0_5.FIPS-INC,r=FIPS-OPENSSL-2.0.5.s001,a=HP-UX_B.11.31_IA,v=HP,fr=FIPS-OPENSSL-2.0.5.s001,fa=HP-UX_B.11.31_IA
fips_2_0_5.FIPS-LIB,r=FIPS-OPENSSL-2.0.5.s001,a=HP-UX_B.11.31_IA,v=HP,fr=FIPS-OPENSSL-2.0.5.s001,fa=HP-UX_B.11.31_IA
fips_2_0_5.FIPS-MAN,r=FIPS-OPENSSL-2.0.5.s001,a=HP-UX_B.11.31_IA,v=HP,fr=FIPS-OPENSSL-2.0.5.s001,fa=HP-UX_B.11.31_IA
fips_2_0_5.FIPS-MIS,r=FIPS-OPENSSL-2.0.5.s001,a=HP-UX_B.11.31_IA,v=HP,fr=FIPS-OPENSSL-2.0.5.s001,fa=HP-UX_B.11.31_IA
fips_2_0_5.FIPS-RUN,r=FIPS-OPENSSL-2.0.5.s001,a=HP-UX_B.11.31_IA,v=HP,fr=FIPS-OPENSSL-2.0.5.s001,fa=HP-UX_B.11.31_IA
fips_2_0_5.FIPS-SRC,r=FIPS-OPENSSL-2.0.5.s001,a=HP-UX_B.11.31_IA,v=HP,fr=FIPS-OPENSSL-2.0.5.s001,fa=HP-UX_B.11.31_IA
openssl.OPENSSL-CER,r=A.01.00.01s.001,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.01.00.01s.001,fa=HP-UX_B.11.31_IA/PA
openssl.OPENSSL-CONF,r=A.01.00.01s.001,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.01.00.01s.001,fa=HP-UX_B.11.31_IA/PA
openssl.OPENSSL-DOC,r=A.01.00.01s.001,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.01.00.01s.001,fa=HP-UX_B.11.31_IA/PA
openssl.OPENSSL-INC,r=A.01.00.01s.001,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.01.00.01s.001,fa=HP-UX_B.11.31_IA/PA
openssl.OPENSSL-LIB,r=A.01.00.01s.001,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.01.00.01s.001,fa=HP-UX_B.11.31_IA
openssl.OPENSSL-MAN,r=A.01.00.01s.001,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.01.00.01s.001,fa=HP-UX_B.11.31_IA/PA
openssl.OPENSSL-MIS,r=A.01.00.01s.001,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.01.00.01s.001,fa=HP-UX_B.11.31_IA/PA
openssl.OPENSSL-PRNG,r=A.01.00.01s.001,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.01.00.01s.001,fa=HP-UX_B.11.31_IA
openssl.OPENSSL-PVT,r=A.01.00.01s.001,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.01.00.01s.001,fa=HP-UX_B.11.31_IA/PA
openssl.OPENSSL-RUN,r=A.01.00.01s.001,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.01.00.01s.001,fa=HP-UX_B.11.31_IA
openssl.OPENSSL-SRC,r=A.01.00.01s.001,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.01.00.01s.001,fa=HP-UX_B.11.31_IA/PA
* Selection succeeded.

* Beginning Analysis and Execution
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
* "fr70vhvmh002:/": 35 filesets have the selected revision
already installed.
* "fr70vhvmh002:/": 1 bundles have the selected revision
already installed.
* The execution phase succeeded for "fr70vhvmh002:/".
* Analysis and Execution succeeded.

NOTE: More information may be found in the agent logfile using the
command "swjob -a log fr70vhvmh002-0093 @ fr70vhvmh002:/".

======= 01/15/18 08:55:24 MET END swinstall SESSION (non-interactive)
(jobid=fr70vhvmh002-0093)

# swjob -a log fr70vhvmh002-0093 @ fr70vhvmh002:/
======= 01/15/18 08:54:10 MET BEGIN install AGENT SESSION (pid=9692)
(jobid=fr70vhvmh002-0093)

* Agent session started for user
"root@fr70vhvmh002.dc-m.alcatel-lucent.com". (pid=9692)

* Beginning Analysis Phase.
* Source:
fr70vhvmh002.dc-m.alcatel-lucent.com:/var/tmp/mydepot/OPENSSL.DEPOT

* Target: fr70vhvmh002:/
* Target logfile: fr70vhvmh002:/var/adm/sw/swagent.log
* Reading source for product information.
NOTE: The fileset "fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.mt003"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_1_2.FIPS-DOC,r=FIPS-OPENSSL-1.1.2.mt003"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_1_2.FIPS-INC,r=FIPS-OPENSSL-1.1.2.mt003"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_1_2.FIPS-LIB,r=FIPS-OPENSSL-1.1.2.mt003"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_1_2.FIPS-MAN,r=FIPS-OPENSSL-1.1.2.mt003"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_1_2.FIPS-MIS,r=FIPS-OPENSSL-1.1.2.mt003"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_1_2.FIPS-RUN,r=FIPS-OPENSSL-1.1.2.mt003"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_1_2.FIPS-SRC,r=FIPS-OPENSSL-1.1.2.mt003"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.2.zf03" will
be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_2.FIPS-DOC,r=FIPS-OPENSSL-1.2.zf03" will
be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_2.FIPS-INC,r=FIPS-OPENSSL-1.2.zf03" will
be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_2.FIPS-LIB,r=FIPS-OPENSSL-1.2.zf03" will
be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_2.FIPS-MAN,r=FIPS-OPENSSL-1.2.zf03" will
be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_2.FIPS-MIS,r=FIPS-OPENSSL-1.2.zf03" will
be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_2.FIPS-RUN,r=FIPS-OPENSSL-1.2.zf03" will
be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_1_2.FIPS-SRC,r=FIPS-OPENSSL-1.2.zf03" will
be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_2_0_5.FIPS-CONF,r=FIPS-OPENSSL-2.0.5.s001"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_2_0_5.FIPS-DOC,r=FIPS-OPENSSL-2.0.5.s001"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_2_0_5.FIPS-INC,r=FIPS-OPENSSL-2.0.5.s001"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_2_0_5.FIPS-LIB,r=FIPS-OPENSSL-2.0.5.s001"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_2_0_5.FIPS-MAN,r=FIPS-OPENSSL-2.0.5.s001"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_2_0_5.FIPS-MIS,r=FIPS-OPENSSL-2.0.5.s001"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_2_0_5.FIPS-RUN,r=FIPS-OPENSSL-2.0.5.s001"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "fips_2_0_5.FIPS-SRC,r=FIPS-OPENSSL-2.0.5.s001"
will be reinstalled because the "reinstall" option is set to
"true".
NOTE: The fileset "openssl.OPENSSL-CER,r=A.01.00.01s.001" will be
reinstalled because the "reinstall" option is set to "true".
NOTE: The fileset "openssl.OPENSSL-CONF,r=A.01.00.01s.001" will be
reinstalled because the "reinstall" option is set to "true".
NOTE: The fileset "openssl.OPENSSL-DOC,r=A.01.00.01s.001" will be
reinstalled because the "reinstall" option is set to "true".
NOTE: The fileset "openssl.OPENSSL-INC,r=A.01.00.01s.001" will be
reinstalled because the "reinstall" option is set to "true".
NOTE: The fileset "openssl.OPENSSL-LIB,r=A.01.00.01s.001" will be
reinstalled because the "reinstall" option is set to "true".
NOTE: The fileset "openssl.OPENSSL-MAN,r=A.01.00.01s.001" will be
reinstalled because the "reinstall" option is set to "true".
NOTE: The fileset "openssl.OPENSSL-MIS,r=A.01.00.01s.001" will be
reinstalled because the "reinstall" option is set to "true".
NOTE: The fileset "openssl.OPENSSL-PRNG,r=A.01.00.01s.001" will be
reinstalled because the "reinstall" option is set to "true".
NOTE: The fileset "openssl.OPENSSL-PVT,r=A.01.00.01s.001" will be
reinstalled because the "reinstall" option is set to "true".
NOTE: The fileset "openssl.OPENSSL-RUN,r=A.01.00.01s.001" will be
reinstalled because the "reinstall" option is set to "true".
NOTE: The fileset "openssl.OPENSSL-SRC,r=A.01.00.01s.001" will be
reinstalled because the "reinstall" option is set to "true".
* Reading source for file information.
* Executing preDSA command.
NOTE: The used disk space on filesystem "/" is estimated to remain
unchanged.
This will leave 3115224 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/opt" is estimated to
increase by 33688 Kbytes.
This will leave 2355400 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/var" is estimated to
remain unchanged.
This will leave 594088 Kbytes of available user disk space
after the installation.
NOTE: The bundle "OpenSSL,r=A.01.00.01s.001" will be reinstalled
because the "reinstall" option is set to "true".

* Summary of Analysis Phase:
* 35 of 35 filesets had no Errors or Warnings.
* The Analysis Phase succeeded.

* Beginning the Install Execution Phase.
* Filesets: 35
* Files: 9428
* Kbytes: 580095
* Installing bundle "OpenSSL,r=A.01.00.01s.001" .
* Installing fileset
"fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.mt003" (1 of 35).
* Installing fileset
"fips_1_1_2.FIPS-DOC,r=FIPS-OPENSSL-1.1.2.mt003" (2 of 35).
* Installing fileset
"fips_1_1_2.FIPS-INC,r=FIPS-OPENSSL-1.1.2.mt003" (3 of 35).
* Installing fileset
"fips_1_1_2.FIPS-LIB,r=FIPS-OPENSSL-1.1.2.mt003" (4 of 35).
* Installing fileset
"fips_1_1_2.FIPS-MAN,r=FIPS-OPENSSL-1.1.2.mt003" (5 of 35).
* Installing fileset
"fips_1_1_2.FIPS-MIS,r=FIPS-OPENSSL-1.1.2.mt003" (6 of 35).
* Installing fileset
"fips_1_1_2.FIPS-RUN,r=FIPS-OPENSSL-1.1.2.mt003" (7 of 35).
* Installing fileset
"fips_1_1_2.FIPS-SRC,r=FIPS-OPENSSL-1.1.2.mt003" (8 of 35).
* Installing fileset
"fips_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.2.zf03" (9 of 35).
* Installing fileset "fips_1_2.FIPS-DOC,r=FIPS-OPENSSL-1.2.zf03"
(10 of 35).
* Installing fileset "fips_1_2.FIPS-INC,r=FIPS-OPENSSL-1.2.zf03"
(11 of 35).
* Installing fileset "fips_1_2.FIPS-LIB,r=FIPS-OPENSSL-1.2.zf03"
(12 of 35).
* Installing fileset "fips_1_2.FIPS-MAN,r=FIPS-OPENSSL-1.2.zf03"
(13 of 35).
* Installing fileset "fips_1_2.FIPS-MIS,r=FIPS-OPENSSL-1.2.zf03"
(14 of 35).
* Installing fileset "fips_1_2.FIPS-RUN,r=FIPS-OPENSSL-1.2.zf03"
(15 of 35).
* Installing fileset "fips_1_2.FIPS-SRC,r=FIPS-OPENSSL-1.2.zf03"
(16 of 35).
* Installing fileset
"fips_2_0_5.FIPS-CONF,r=FIPS-OPENSSL-2.0.5.s001" (17 of 35).
* Installing fileset
"fips_2_0_5.FIPS-DOC,r=FIPS-OPENSSL-2.0.5.s001" (18 of 35).
* Installing fileset
"fips_2_0_5.FIPS-INC,r=FIPS-OPENSSL-2.0.5.s001" (19 of 35).
* Installing fileset
"fips_2_0_5.FIPS-LIB,r=FIPS-OPENSSL-2.0.5.s001" (20 of 35).
* Installing fileset
"fips_2_0_5.FIPS-MAN,r=FIPS-OPENSSL-2.0.5.s001" (21 of 35).
* Installing fileset
"fips_2_0_5.FIPS-MIS,r=FIPS-OPENSSL-2.0.5.s001" (22 of 35).
* Installing fileset
"fips_2_0_5.FIPS-RUN,r=FIPS-OPENSSL-2.0.5.s001" (23 of 35).
* Installing fileset
"fips_2_0_5.FIPS-SRC,r=FIPS-OPENSSL-2.0.5.s001" (24 of 35).
* Installing fileset "openssl.OPENSSL-CER,r=A.01.00.01s.001" (25
of 35).
* Installing fileset "openssl.OPENSSL-CONF,r=A.01.00.01s.001"
(26 of 35).
* Installing fileset "openssl.OPENSSL-DOC,r=A.01.00.01s.001" (27
of 35).
* Installing fileset "openssl.OPENSSL-INC,r=A.01.00.01s.001" (28
of 35).
* Installing fileset "openssl.OPENSSL-LIB,r=A.01.00.01s.001" (29
of 35).
* Installing fileset "openssl.OPENSSL-MAN,r=A.01.00.01s.001" (30
of 35).
* Installing fileset "openssl.OPENSSL-MIS,r=A.01.00.01s.001" (31
of 35).
* Installing fileset "openssl.OPENSSL-PRNG,r=A.01.00.01s.001"
(32 of 35).
* Installing fileset "openssl.OPENSSL-PVT,r=A.01.00.01s.001" (33
of 35).
* Installing fileset "openssl.OPENSSL-RUN,r=A.01.00.01s.001" (34
of 35).
* Installing fileset "openssl.OPENSSL-SRC,r=A.01.00.01s.001" (35
of 35).

* Beginning the Configure Execution Phase.

NOTE: Processes 2447
are currently using the library/binary /opt/openssl/1.0/lib/hpux64/#libcrypto.so.1.0.0.
A new version of this library has been installed.
To use the new version, you must stop and restart the process.

* Summary of Execution Phase:
* 35 of 35 filesets had no Errors or Warnings.
* The Execution Phase succeeded.

======= 01/15/18 08:55:24 MET END install AGENT SESSION (pid=9692)
(jobid=fr70vhvmh002-0093)
#

[3r]

Hi Bill, 

Sorry I cannot attached the file, below are the output of swinstall for SSH:

# swinstall -s /var/tmp/mydepot/MYDEPOT.DEPOT -x reinstall=true \*

======= 01/15/18 09:01:32 MET BEGIN swinstall SESSION
(non-interactive) (jobid=fr70vhvmh002-0094)

* Session started for user "root@fr70vhvmh002".

* Beginning Selection
* Target connection succeeded for "fr70vhvmh002:/".
NOTE: The software "Secure_Shell" was successfully marked, but it
depends on the following software items which could not be
found in the source. However, these items may already be in
the target. This will be checked during the Analysis Phase:
openssl.OPENSSL-LIB,r>=A.01.00.02h,a=HP-UX_B.11.31_IA/PA
* Source: /var/tmp/mydepot/MYDEPOT.DEPOT
* Targets: fr70vhvmh002:/
* Software selections:
SecureShell,r=A.07.30.003,a=HP-UX_B.11.31_IA/PA,v=HP
Secure_Shell.SECSH-CMN,r=A.07.30.003,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.07.30.003,fa=HP-UX_B.11.31_IA/PA
Secure_Shell.SECURE_SHELL,r=A.07.30.003,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.07.30.003,fa=HP-UX_B.11.31_IA
* Selection succeeded.

* Beginning Analysis and Execution
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
* "fr70vhvmh002:/": 2 filesets have the selected revision
already installed.
ERROR: "fr70vhvmh002:/": The software dependencies for 1 products or
filesets cannot be resolved.
* "fr70vhvmh002:/": 1 bundles have the selected revision
already installed.
* The analysis phase failed for "fr70vhvmh002:/".
ERROR: "fr70vhvmh002:/": 1 software objects were determined to be
skipped in the analysis phase.
ERROR: "fr70vhvmh002:/": 1 configure or unconfigure scripts failed.
* The execution phase failed for "fr70vhvmh002:/".
* Analysis and Execution had errors.

ERROR: More information may be found in the agent logfile using the
command "swjob -a log fr70vhvmh002-0094 @ fr70vhvmh002:/".

======= 01/15/18 09:01:39 MET END swinstall SESSION (non-interactive)
(jobid=fr70vhvmh002-0094)

#
#
# swjob -a log fr70vhvmh002-0094 @ fr70vhvmh002:/
======= 01/15/18 09:01:32 MET BEGIN install AGENT SESSION (pid=11270)
(jobid=fr70vhvmh002-0094)

* Agent session started for user
"root@fr70vhvmh002.dc-m.alcatel-lucent.com". (pid=11270)

* Beginning Analysis Phase.
* Source:
fr70vhvmh002.dc-m.alcatel-lucent.com:/var/tmp/mydepot/MYDEPOT.DEPOT

* Target: fr70vhvmh002:/
* Target logfile: fr70vhvmh002:/var/adm/sw/swagent.log
* Reading source for product information.
NOTE: The fileset "Secure_Shell.SECSH-CMN,r=A.07.30.003" will be
reinstalled because the "reinstall" option is set to "true".
NOTE: The fileset "Secure_Shell.SECURE_SHELL,r=A.07.30.003" will be
reinstalled because the "reinstall" option is set to "true".
* Reading source for file information.
The corequisite
"openssl.OPENSSL-LIB,r>=A.01.00.02h,a=HP-UX_B.11.31_IA/PA" for
fileset "Secure_Shell.SECURE_SHELL,r=A.07.30.003" cannot be
successfully resolved.
ERROR: The dependencies for fileset
"Secure_Shell.SECURE_SHELL,r=A.07.30.003" cannot be resolved
(see previous lines).
You must resolve the above dependencies before operating on
this fileset or change the "enforce_dependencies" option to
"false".
* Executing preDSA command.
NOTE: The used disk space on filesystem "/" is estimated to remain
unchanged.
This will leave 3115224 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/opt" is estimated to
remain unchanged.
This will leave 2382424 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/var" is estimated to
remain unchanged.
This will leave 598768 Kbytes of available user disk space
after the installation.
NOTE: The bundle "SecureShell,r=A.07.30.003" will be reinstalled
because the "reinstall" option is set to "true".

* Summary of Analysis Phase:
ERROR: Exclude Secure_Shell.SECURE_SHELL,r=A.07.30.003
ERROR: 1 of 2 filesets had Errors.
* 1 of 2 filesets had no Errors or Warnings.
ERROR: The Analysis Phase had errors. See the above output for
details.

* Beginning the Install Execution Phase.
* Filesets: 1
* Files: 491
* Kbytes: 6040
* Installing bundle "SecureShell,r=A.07.30.003" .
* Installing fileset "Secure_Shell.SECSH-CMN,r=A.07.30.003" (1
of 1).
NOTE: A new version of "/etc/rc.config.d/sshd" has been placed on
the system. The new version is located at
"/opt/ssh/newconfig/etc/rc.config.d/sshd".
The existing version of "/etc/rc.config.d/sshd" is not being
overwritten since it appears that it has been modified by the
administrator since it was delivered.
NOTE: A new version of "/opt/ssh/etc/ssh_config" has been placed on
the system. The new version is located at
"/opt/ssh/newconfig/opt/ssh/etc/ssh_config".
The existing version of "/opt/ssh/etc/ssh_config" is not being
overwritten since it appears that it has been modified by the
administrator since it was delivered.
NOTE: A new version of "/opt/ssh/etc/sshd_config" has been placed on
the system. The new version is located at
"/opt/ssh/newconfig/opt/ssh/etc/sshd_config".
The existing version of "/opt/ssh/etc/sshd_config" is not
being overwritten since it appears that it has been modified
by the administrator since it was delivered.

* Beginning the Configure Execution Phase.
OpenSSL version mismatch. Built against 1000206f, you have 1000113f
ERROR: could not generate ECDSA host key
ERROR: The "configure" script for "Secure_Shell.SECSH-CMN" failed
(exit code "1"). The script location was
"/var/tmp/BAA011270/catalog/Secure_Shell/SECSH-CMN/configure".
* This script had errors and the execution of this fileset
cannot proceed until the problem is fixed. Check the above
output from the script for further details.

* Summary of Execution Phase:
ERROR: Installed Secure_Shell.SECSH-CMN,r=A.07.30.003
ERROR: Skipped (in analysis) Secure_Shell.SECURE_SHELL,r=A.07.30.003
ERROR: 2 of 2 filesets had Errors.
ERROR: The Execution Phase had errors. See the above output for
details.

======= 01/15/18 09:01:39 MET END install AGENT SESSION (pid=11270)
(jobid=fr70vhvmh002-0094)
#

[3r]

Hi All,

Can anyone help with this error after reinstalling the OpenSSL.

NOTE: Processes 2447
are currently using the library/binary /opt/openssl/1.0/lib/hpux64/#libcrypto.so.1.0.0.
A new version of this library has been installed.
To use the new version, you must stop and restart the process.

when I check the process 2447:
# ps -ef |grep -i 2447
root 2447 2440 0 Jan 12 ? 0:42 /opt/wbem/lbin/cimprovagt 0 4 9 root SFMProviderModule
root 18929 3461 1 10:49:44 console 0:00 grep -i 2447

then I stop cimserver and start it back, now that process is gone  /opt/wbem/lbin/cimprovagt, and I rebooted again but still the same issue.

# ls -ltr /opt/openssl/1.0/lib/hpux64
total 55104
-r--r--r-- 1 bin bin 1847506 Mar 9 2016 libssl.1.0.1s.a
-r-xr-xr-x 1 bin bin 6820864 Mar 9 2016 libcrypto.so.1.0.0
-r-xr-xr-x 1 bin bin 7939312 Mar 9 2016 libssl.so.1.0.0
-r--r--r-- 1 bin bin 11583158 Mar 9 2016 libcrypto.1.0.1s.a
dr-xr-xr-x 2 bin bin 96 Jan 12 10:31 pkgconfig
dr-xr-xr-x 2 bin bin 8192 Jan 15 08:55 engines
lrwxr-xr-x 1 root sys 44 Jan 15 08:55 libcrypto.so.1 -> /opt/openssl/0.9.8/lib/hpux64/libcrypto.so.1
lr-xr-xr-x 1 bin bin 15 Jan 15 08:55 libssl.so -> libssl.so.1.0.0
lrwxr-xr-x 1 root sys 46 Jan 15 08:55 libssl.0.9.8zf.a -> /opt/openssl/0.9.8/lib/hpux64/libssl.0.9.8zf.a
lrwxr-xr-x 1 root sys 18 Jan 15 08:55 libcrypto.a -> libcrypto.1.0.1s.a
lrwxr-xr-x 1 root sys 48 Jan 15 08:55 libcrypto.0.9.7m.a -> /opt/openssl/0.9.7/lib/hpux64/libcrypto.0.9.7m.a
lrwxr-xr-x 1 root sys 45 Jan 15 08:55 libssl.0.9.7m.a -> /opt/openssl/0.9.7/lib/hpux64/libssl.0.9.7m.a
lrwxr-xr-x 1 root sys 44 Jan 15 08:55 libcrypto.so.0 -> /opt/openssl/0.9.7/lib/hpux64/libcrypto.so.0
lrwxr-xr-x 1 root sys 41 Jan 15 08:55 libssl.so.0 -> /opt/openssl/0.9.7/lib/hpux64/libssl.so.0
lrwxr-xr-x 1 root sys 49 Jan 15 08:55 libcrypto.0.9.8zf.a -> /opt/openssl/0.9.8/lib/hpux64/libcrypto.0.9.8zf.a
lrwxr-xr-x 1 root sys 15 Jan 15 08:55 libssl.a -> libssl.1.0.1s.a
lr-xr-xr-x 1 bin bin 18 Jan 15 08:55 libcrypto.so -> libcrypto.so.1.0.0
lrwxr-xr-x 1 root sys 41 Jan 15 08:55 libssl.so.1 -> /opt/openssl/0.9.8/lib/hpux64/libssl.so.1

2# find / -name libcrypto.so.1.0.0
/opt/openssl/0.9.7/lib/hpux32/libcrypto.so.1.0.0
/opt/openssl/0.9.7/lib/hpux64/libcrypto.so.1.0.0
/opt/openssl/0.9.8/lib/hpux32/libcrypto.so.1.0.0
/opt/openssl/0.9.8/lib/hpux64/libcrypto.so.1.0.0
/opt/openssl/fips/1.0/lib/hpux32/libcrypto.so.1.0.0
/opt/openssl/fips/1.0/lib/hpux64/libcrypto.so.1.0.0
/opt/openssl/1.0/lib/hpux32/libcrypto.so.1.0.0
/opt/openssl/1.0/lib/hpux64/libcrypto.so.1.0.0
/usr/lib/hpux32/libcrypto.so.1.0.0
/usr/lib/hpux64/libcrypto.so.1.0.0

not sure if Need to update the library manually.

[Bill Hassell]

The SFM module is using the SSLlibraries as you have seen.
Also, there are several versions of the libcrypto file on your system.
Most likely this is due to not installing the HPE-supplied version of OpenSSL sometime in the past.
This was a common situation a while back when HPE was slow to update their version OpenSSL and several sysadmins installed opensource versions to provide better security. The code was OK but the packaging did not follow all the HPE steps to properly install/reinstall the components. As you have seen, other tools (SFM) are using the libcrypto file.

I would stop cimserver completely:  /sbin/init.d/cimserver stop

Then use swremove to remove SSL and SSH:

# swremove SecureShell
# swremove OpenSSL
# swremove openssl

Then use swinstall to install OpenSSL and check for errors.
If all is well, install SSH and then restart cimserver.

[3r]

Hi Bill,

I have sucessfully removed OpenSSL and SecureShell, and the resintallation of OpenSSL also completed with no issue. But for SecureShell I still encountered the same issue.

* Reading source for file information.
The corequisite
"openssl.OPENSSL-LIB,r>=A.01.00.02h,a=HP-UX_B.11.31_IA/PA" for
fileset "Secure_Shell.SECURE_SHELL,r=A.07.30.003" cannot be
successfully resolved.

See complete swinstall output and swjob output below.

# swinstall -s fr70vhvmh002:/var/tmp/mydepot/MYDEPOT.DEPOT SecureShell

======= 01/16/18 11:10:48 MET BEGIN swinstall SESSION
(non-interactive) (jobid=fr70vhvmh002-0103)

* Session started for user "root@fr70vhvmh002".

* Beginning Selection
* Target connection succeeded for "fr70vhvmh002:/".
NOTE: The software item "SecureShell" is a bundle (or a product,
subproduct or fileset contained within a bundle). This item
was successfully marked, but difficulties were encountered
while marking some items that it depends on. The messages
below show which software items encountered difficulties and
exactly what these difficulties were:
* The software
"Secure_Shell,r=A.07.30.003,a=HP-UX_B.11.31_IA/PA,v=HP" was
successfully marked, but it depends on the following software
items which could not be found in the source. However, these
items may already be in the target. This will be checked
during the Analysis Phase:
openssl.OPENSSL-LIB,r>=A.01.00.02h,a=HP-UX_B.11.31_IA/PA
* Source:
fr70vhvmh002:/var/tmp/mydepot/MYDEPOT.DEPOT
* Targets: fr70vhvmh002:/
* Software selections:
SecureShell,r=A.07.30.003,a=HP-UX_B.11.31_IA/PA,v=HP
Secure_Shell.SECSH-CMN,l=/opt/ssh,r=A.07.30.003,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.07.30.003,fa=HP-UX_B.11.31_IA/PA
Secure_Shell.SECURE_SHELL,l=/opt/ssh,r=A.07.30.003,a=HP-UX_B.11.31_IA/PA,v=HP,fr=A.07.30.003,fa=HP-UX_B.11.31_IA
* Selection succeeded.

* Beginning Analysis and Execution
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
ERROR: "fr70vhvmh002:/": The software dependencies for 1 products or
filesets cannot be resolved.
* The analysis phase failed for "fr70vhvmh002:/".
ERROR: "fr70vhvmh002:/": 1 software objects were determined to be
skipped in the analysis phase.
ERROR: "fr70vhvmh002:/": 1 configure or unconfigure scripts failed.
* The execution phase failed for "fr70vhvmh002:/".
* Analysis and Execution had errors.

ERROR: More information may be found in the agent logfile using the
command "swjob -a log fr70vhvmh002-0103 @ fr70vhvmh002:/".

======= 01/16/18 11:11:05 MET END swinstall SESSION (non-interactive)
(jobid=fr70vhvmh002-0103)

#
# swjob -a log fr70vhvmh002-0103 @ fr70vhvmh002:/
======= 01/16/18 11:10:49 MET BEGIN install AGENT SESSION (pid=4267)
(jobid=fr70vhvmh002-0103)

* Agent session started for user
"root@fr70vhvmh002.dc-m.alcatel-lucent.com". (pid=4267)

* Beginning Analysis Phase.
* Source:
fr70vhvmh002.dc-m.alcatel-lucent.com:/var/tmp/mydepot/MYDEPOT.DEPOT

* Target: fr70vhvmh002:/
* Target logfile: fr70vhvmh002:/var/adm/sw/swagent.log
* Reading source for product information.
* Reading source for file information.
The corequisite
"openssl.OPENSSL-LIB,r>=A.01.00.02h,a=HP-UX_B.11.31_IA/PA" for
fileset "Secure_Shell.SECURE_SHELL,r=A.07.30.003" cannot be
successfully resolved.
ERROR: The dependencies for fileset
"Secure_Shell.SECURE_SHELL,r=A.07.30.003" cannot be resolved
(see previous lines).
You must resolve the above dependencies before operating on
this fileset or change the "enforce_dependencies" option to
"false".
* Executing preDSA command.
NOTE: The used disk space on filesystem "/" is estimated to increase
by 8 Kbytes.
This will leave 3115040 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/opt" is estimated to
increase by 8272 Kbytes.
This will leave 2407184 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/var" is estimated to
increase by 184 Kbytes.
This will leave 605824 Kbytes of available user disk space
after the installation.

* Summary of Analysis Phase:
ERROR: Exclude Secure_Shell.SECURE_SHELL,r=A.07.30.003
ERROR: 1 of 2 filesets had Errors.
* 1 of 2 filesets had no Errors or Warnings.
ERROR: The Analysis Phase had errors. See the above output for
details.

* Beginning the Install Execution Phase.
* Filesets: 1
* Files: 491
* Kbytes: 6040
* Installing bundle "SecureShell,r=A.07.30.003" .
* Installing fileset "Secure_Shell.SECSH-CMN,r=A.07.30.003" (1
of 1).
NOTE: A new version of "/etc/rc.config.d/sshd" has been installed on
the system.
NOTE: A new version of "/opt/ssh/etc/ssh_config" has been installed
on the system.
NOTE: A new version of "/opt/ssh/etc/sshd_config" has been installed
on the system.
NOTE: A new version of "/opt/ssh/etc/moduli" has been installed on
the system.

* Beginning the Configure Execution Phase.
/var/tmp/BAA004267/catalog/Secure_Shell/SECSH-CMN/configure[116]: /opt/ssh/bin/ssh-keygen: not found.
ERROR: could not generate ECDSA host key
ERROR: The "configure" script for "Secure_Shell.SECSH-CMN" failed
(exit code "1"). The script location was
"/var/tmp/BAA004267/catalog/Secure_Shell/SECSH-CMN/configure".
* This script had errors and the execution of this fileset
cannot proceed until the problem is fixed. Check the above
output from the script for further details.

* Summary of Execution Phase:
ERROR: Installed Secure_Shell.SECSH-CMN,r=A.07.30.003
ERROR: Skipped (in analysis) Secure_Shell.SECURE_SHELL,r=A.07.30.003
ERROR: 2 of 2 filesets had Errors.
ERROR: The Execution Phase had errors. See the above output for
details.

======= 01/16/18 11:11:05 MET END install AGENT SESSION (pid=4267)
(jobid=fr70vhvmh002-0103)
#

[3r]

Hi Bill,

The issue is now resolved by installing OpenSSL A.01.00.02k.001. Thank you for the input it is highly appreciated.

# ssh -V
OpenSSH_7.3p1+sftpfilecontrol-v1.3-hpn14v11, OpenSSL 1.0.2k 26 Jan 2017
HP-UX Secure Shell-A.07.30.003, HP-UX Secure Shell version