HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Cant able to boot from lan in HP rp5450 server.

 
Prasanth Thomas
Valued Contributor

Cant able to boot from lan in HP rp5450 server.

Hello Team,

We are facing issue in lan boot on rp5450 server, The OS version is HP 11.00 and we tried to restore from the ignite by using the lan boot but no luckplease find the below error details. Could you please help on this issue.=========

The first issue was we cant able to boot the server its giving th error---
panic: I/O system hang

PC-Offset Stack Trace (read across, top of stack is 1st):
0x00395704 0x004461a0 0x000fdeb8
0x00040e10 0x003a8b60 0x00182df4
0x0017b7e4 0x0017de4c
End Of Stack



* A system crash has occurred. (See the above messages for details.)
* The system is now preparing to dump physical memory to disk, for use
* in debugging the crash.

ERROR: Your system crashed before I/O and dump configuration was complete.
A crash dump cannot be taken under these circumstances without
special configuration. Contact your HP support representative.
--------------------------------
And we tried to restore from ignite server then its giving the below error....

Main Menu: Enter command or menu > SEArch lan

Searching for potential boot device(s) - on Path 0/0/0/0
This may take several minutes.

To discontinue search, press any key (termination may not be immediate).


Path# Device Path (dec) Device Path (mnem) Device Type
----- ----------------- ------------------ -----------

No Devices Found


Main Menu: Enter command or menu > bo lan
Interact with IPL (Y, N, or Cancel)?> n

Booting...
Failed to initialize.

ENTRY_INIT
Status = -4

00000000 00000000 00000000 00000000 00000000 00000010 00000000 83FC02BF
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000005 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000007 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

Failed to initialize.



---- Main Menu ---------------------------------------------------------------

Command Description
------- -----------
BOot [PRI|ALT|] Boot from specified path
PAth [PRI|ALT] [] Display or modify a path
SEArch [DIsplay|IPL] [] Search for boot devices

COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands

DIsplay Redisplay the current menu
HElp [|] Display help for menu or command
RESET Restart the system
----
Main Menu: Enter command or menu >
==========================================

Thanks In Advance,
Prasanth Thomas.
5 REPLIES
Torsten.
Acclaimed Contributor

Re: Cant able to boot from lan in HP rp5450 server.

Try

ISL> boot lan.n.n.n.n install
where: n.n.n.n is the IP address of the Ignite-UX server.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Tingli
Esteemed Contributor

Re: Cant able to boot from lan in HP rp5450 server.

And, how is your /etc/opt/ignite/instl_boottab file?
Prasanth Thomas
Valued Contributor

Re: Cant able to boot from lan in HP rp5450 server.

have tried the boot lan.x.x.x.x.install but no luck...
Please find the below /etc/opt/ignite/instl_boottab details-------
# 15.1.54.138:080009123457::reserve # Reserve an IP-Addr for specific host
#
170.118.105.205 uk205.uk.infores.com

uk205:\
tc=ignite-defaults:\
ha=001083FC02BF:\
ip=170.118.105.205:\
sm=255.255.254.192:\
gw=170.118.105.255:\
ds=170.118.101.26



Thanks In Advance,
Parasnth Thomas.
Torsten.
Acclaimed Contributor

Re: Cant able to boot from lan in HP rp5450 server.

This doesn't look like the same subnet - so you need a boot helper (see the ignite manual for more information).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ASIFKHAN
Frequent Advisor

Re: Cant able to boot from lan in HP rp5450 server.

Hi,

Go to Information menu:
Main Menu: Enter command or menu > IN
then after getting into information menu type: boot lan.server_IP_address install

and answer no to intraction with IPL.

Select the operating system to install from the displayed menu. Choose the operating system that matches the OE you used when you set up the Ignite-UX server â â Create the HP-UX OE.

I hope this will help you.

Thanks ...
MAK