Operating System - HP-UX
1747985 Members
4799 Online
108756 Solutions
New Discussion юеВ

Checking cpu state aftr upgrading from rp5430 to rp5470

 
SOLVED
Go to solution
Ugly Kid Joe
Advisor

Checking cpu state aftr upgrading from rp5430 to rp5470

Hi gurus,
Please I would need to know how to check if the ugrade from rp5430 to rp5470 (2CPUs to 4 CPUs) went well. On STM there a worrying display on one cpu state, it says: CPU (5df) 33 Information Killed (On bright yellow background!!!)
Are the 4 CPUs fully running ?
Thanks
4 REPLIES 4
Adam Noble
Super Advisor

Re: Checking cpu state aftr upgrading from rp5430 to rp5470

Why not simply re-run the info.
type cstm. At the prompt type map and then select the device number for the problem CPU and then type info and then infolog. I assume it may be even easier via the graphical interface if thats what you are using.

Also if you have glance/top just check the CPU's are showing in there.
Marcin O.
Frequent Advisor

Re: Checking cpu state aftr upgrading from rp5430 to rp5470

Did you try "ioscan -fnC processor"?
Did you see all processors?
tkc
Esteemed Contributor
Solution

Re: Checking cpu state aftr upgrading from rp5430 to rp5470

boot up the server and interrupt the boot up process in the bch menu. use the command 'in pr'. refer to :

http://www.docs.hp.com/en/A5191-96022/ch01s02.html
Ugly Kid Joe
Advisor

Re: Checking cpu state aftr upgrading from rp5430 to rp5470

Ok thanks guys, all processors are in claimed state, will check on BCH as well when appropriate ...