Checking cpu state aftr upgrading from rp5430 to rp5470

[Ugly Kid Joe]

Hi gurus,
Please I would need to know how to check if the ugrade from rp5430 to rp5470 (2CPUs to 4 CPUs) went well. On STM there a worrying display on one cpu state, it says: CPU (5df) 33 Information Killed (On bright yellow background!!!)
Are the 4 CPUs fully running ?
Thanks

[Adam Noble]

Why not simply re-run the info.
type cstm. At the prompt type map and then select the device number for the problem CPU and then type info and then infolog. I assume it may be even easier via the graphical interface if thats what you are using.

Also if you have glance/top just check the CPU's are showing in there.

[Marcin O.]

Did you try "ioscan -fnC processor"?
Did you see all processors?

[tkc · Accepted solution]

boot up the server and interrupt the boot up process in the bch menu. use the command 'in pr'. refer to :

http://www.docs.hp.com/en/A5191-96022/ch01s02.html

[Ugly Kid Joe]

Ok thanks guys, all processors are in claimed state, will check on BCH as well when appropriate ...