System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Command for checking how many paths are coming from Storage

Vpro
Occasional Advisor

Command for checking how many paths are coming from Storage

Hi Experts

We have CLARiiON CX-series storage in our envrionment, there are few hp-ux hosts which do not have powerpath and we want to check what

1) What are the LUNs coming from CLARiiON
2) What are the Logical ID's for these LUNs
3) How many paths exist for the LUN.

Your help is greatly appreciated.

Regards
3 REPLIES
Torsten.
Acclaimed Contributor

Re: Command for checking how many paths are coming from Storage

The special software (powerpath) will give you this information easily. Re-inventing the wheel is much more complicated.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Matti_Kurkela
Honored Contributor

Re: Command for checking how many paths are coming from Storage

At minimum, you'll need the EMC Inquiry tool (it's free):

ftp://ftp.emc.com/pub/elab/inquiry/

MK
MK
Kranti Mahmud
Honored Contributor

Re: Command for checking how many paths are coming from Storage

Hi Vpro,

check the below commands:

# powermt display dev=all
# powermt display dev=all | grep LUN
# powermt display dev=all | grep LUN | wc -l

Rgds-Kranti
Dont look BACK as U will miss something INFRONT!